Propeller Installation; External Power Supply; Battery Cover Open Steps; I.flying Warnings - Yunyi-flight Seraphi P GPS User Manual

Propeller Installation

The direction of the arrow on each propeller
indicates the rotation direction of the propeller
and the motor. Mount each propeller on the
corresponding motor with the same arrow. BE
SURE that the side with the arrow on each
propeller faces the sky. DO Not mount it
upside-down. Then screw down each nut.

External power supply

This power cord(connect to3S lipo battery )
provides power for external device ,such as
Gimbal
Red wire is the positive and black wire is negative.

Battery cover open steps

A:Press down Battery cover triangular arrow icon firmly with the left thumb
B:Slide the battery cover out with right thumb, open the battery cover

I.Flying warnings

1. For the first flying, beginners are strongly suggested taking necessary trainings by professionals or doing some pre-
exercises on simulators until you can skillfully operate the aircraft or the simulator and the
2. During flying, please make sure that Seraphi is always within sight and its back light always faces its operator so that he
could determine its flight attitude and adjust its flight directions when necessary.
3. During flying, what's more, please watch the flash of back light at any time and keep alert to Low-Voltage signals. Low-
Voltage Alert is to indicate that the battery cannot provide enough power for the aircraft and
the aircraft ASAP to avoid or reduce crashes or other harmful consequences.
4. Sensors in the heart of SeraphI are damageable, so be sure not to hit or drop the aircraft heavily. Otherwise, the inertial
measuring unit (IMU) might be destroyed. If Seraphi flies in an abnormal way after being hit or dropped Seriously, please
return it to Yunyi-Flight to repair immediately.
A
B
remote controller
it is triggered to warn you to land