Subscribe to Our Youtube Channel
Related Manuals for Southern MS040400TX
Summary of Contents for Southern MS040400TX
- Page 1 MS040400TX Kenwick Media Console For assistance with assembly, contact： Southern Enterprises Inc. Assembly Instructions Customer Service 1-800-633-5096 service@seidal.com www.seifurniturestore.com PO：13862...
- Page 2 Kenwick Media Console Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or a blanket. Check that you have all parts indicated. Call customer service if any hardware is missing.
- Page 3 Quantity Quantity of 24 of 22 Screw (￠1/8”x1”) Screw (￠1/8”x1/2”) Quantity Quantity of 8 of 4 Shelf pin Door Pin Quantity Quantity Quantity of 1 of 1 of 1 Fixed Shelf Bottom Panel Left Lower Vertical Panel Quantity Quantity Quantity of 1 of 1 of 1...
- Page 4 Quantity Quantity Quantity of 3 of 3 of 3 Drawer Front Left Drawer Side Right Drawer Side Quantity Quantity Quantity of 3 of 3 of 1 Drawer Back Drawer Bottom Back Panel Quantity Quantity Quantity of 1 of 1 of 1 Left Adjustable Shelf Right Adjustable Shelf Left Door...
- Page 5 Kenwick Media Console Assembly Instructions Attach Magnets (F) to Fixed Shelf Panel (1) with screws (E). Tighten screws with Phillips Screwdriver (not included) Figure 1 Insert 4pcs Cam Locks (C) into holes on Lower Vertical Panels (3/4). Please do not overtighten cam locks. Stop when they feel secure. Screw Cam Bolts (A) into holes on Bottom Panel (2).
- Page 6 Insert Cam Locks (C) into holes on Lower Vertical Panels (3/4). Screw Cam Bolts (A) into holes on Fixed Shelf Panel (1). Attach pre-assembled unit from Figure 2 to Fixed Panel (1) by inserting Wood Dowels (A) and Cam Bolts (C) into corresponding holes until Panels meet.
- Page 7 Insert Cam Locks (C) into holes on Upper Vertical Panel (8). Screw Cam Bolts (A) into holes pre-assembled unit from Figure Attach pre-assembled unit from Figure 4 to Upper Vertical Panel (8) by inserting Wood Dowels (A) and Cam Bolts (C) into corresponding holes until Panels meet.
- Page 8 Attach Left Drawer Side Panel (11) and Right Drawer Side Panel (12) to Drawer Front Panel (10) with Screws (I). Tighten Screws with Phillips Screwdriver (not included). Insert Drawer Bottom Panel (14) into the corresponding groove of Left Drawer Side Panel (11), Right Drawer Side Panel (12), and Drawer Front Panel (10).
- Page 9 Insert Shelf Pins (K) into corresponding holes on pre-assembled unit from Figure Insert Adjustable Shelves (16/17) onto Shelf Pins (K). Figure 9 Insert Door Pins (L) in to corresponding holes on Doors (18/19). Attach Doors (18/19) to pre-assembled unit from Figure 9 by hand.
- Page 10 Insert pre-assembled drawers from Figure 7 into pre-assembled unit from Figure10. Note: Ensure drawer's male ball bearings slide into side panel’s female ball bearings. Make sure ball bearings slide in and out smoothly. Figure 11 Now your Kenwick Media Console is ready to use!
-
Page 11: Parts Replacement Form
90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central time if you have product issues or email us at service@hollyandmartin.com. Please ask for customer service representative for issues involving damages or replacement parts. - Page 12 This unit contains a permanent warning sticker located on under side of top shelf or inside drawer. Do not allow children under 16 years to move the cart. Model: MS040400TX Kenwick Media Console Southern Enterprises, Inc 600 Freeport Parkway,...
Need help?
Do you have a question about the MS040400TX and is the answer not in the manual?
Questions and answers