Page 1
Dual Band 2T2R MIMO Wi-Fi Module MODEL NAME TWFM-L006D The information contained herein is the exclusive property of LG Innotek and shall not be distributed, reproduced or disclosed in whole or no in part without prior written permission of LG Innotek.
User Manual REG. DATE : 2013.12.13 REV.NO : 1.0 MODEL NAME : TWFM-L006D REV. DATE : 2013.12.13 PAGE : 1 / 11 Table of Contents Description Page Features Module Photo Block Diagram Storage Test Conditions Operating Test Conditions Software Programming...
REV. DATE : 2013.12.13 PAGE : 2 / 11 1. Features TWFM-L006D is the module for IEEE 802.11a/b/g/n wireless LAN. TWFM-L006D is based on MTK RT5572 solution. IEEE 802.11 a/b/g/n Dual Band WLAN infrastructure Size : 40mm x46.5mm x 8.25mm ...
User Manual REG. DATE : 2013.12.13 REV.NO : 1.0 MODEL NAME : TWFM-L006D REV. DATE : 2013.12.13 PAGE : 4 / 11 4. Storage Test Conditions Parameter Unit ℃ Storage Temperature Storage Humidity (@ 40℃) Caution : The specifications above the Table define levels at which permanent damage to the device can occur.
User Manual REG. DATE : 2013.12.13 REV.NO : 1.0 MODEL NAME : TWFM-L006D REV. DATE : 2013.12.13 PAGE : 5 / 11 6. Software Programming 1) Windows Utility Execute the released windows utility installer. (1) Run RaUI.exe < Fig1.1 RaUI icon>...
Page 7
User Manual REG. DATE : 2013.12.13 REV.NO : 1.0 MODEL NAME : TWFM-L006D REV. DATE : 2013.12.13 PAGE : 6 / 11 (4) Button section. - Site survey, Link information, Profile, Advanced, Information, About page. - Help page. < Fig1.4 Button section>...
User Manual REG. DATE : 2013.12.13 REV.NO : 1.0 MODEL NAME : TWFM-L006D REV. DATE : 2013.12.13 PAGE : 7 / 11 7. Pin Description Pin No. Pin Name Pin Description VDD 5.0V USB_DN USB Communication signal USB_DN USB_DP USB Communication signal USB_DP...
Page 13
FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 14
Information for OEM Integrator The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. End product labelling The label for end product must include “Contains FCC ID: YZP-TWFML006D”.
Need help?
Do you have a question about the TWFM-L006D and is the answer not in the manual?
Questions and answers