Advertisement
Quick Links
Model: SF13PB
1. Operation instruction
1.1 LED torch using
Under fully charged, the energy-saving LED torch will last for above 200 hours. LED torch will
be turned off automatically 15 minutes later when it is bright.
Power on — Press and hold the button for 2 seconds;
Power off — Release the button, and again, press and hold the button for 2
seconds.
1.2 Battery Indicator
1 power indicator and 4 battery level indicators, thus making you can get the power bank's
electricity condition easily. Show as follows:
Battery level
indicators
SF13PB capacity
1.3 Charging
Equipped with a Micro double function data line. Charging SF13PB with USB input interface,
charging the other devices with output interface.
light 1
indicator
Light 1
and
indicator
flashing
<15%
15%~25%
Light
2
Light 3
indicators
indicators
25%~50%
50%~75%
Light 4
indicators
75%~100%
Advertisement
Summary of Contents for Safeshine SF13PB
- Page 1 Light 3 Light 4 indicators indicator indicators indicators indicators flashing SF13PB capacity <15% 15%~25% 25%~50% 50%~75% 75%~100% 1.3 Charging Equipped with a Micro double function data line. Charging SF13PB with USB input interface, charging the other devices with output interface.
- Page 2 2. Charging for the other devices SF13PB is used to charge digital communication products with DC-5V input. There is a double function data wire which is compatible to most mobile phone and many other digital communication products. 3. Charging for SF13PB...
- Page 3 3.3 Connect USB interface to charge SF13PB is also allowed, showed as following picture 2. Remarks: (1) SF13PB supply with a big capacity, charging time is about 10 hours, also depending on the actual condition. (2) Please check if the wire is normal or not, or if the connection interface stable or not, when you find SF13PB can not be charged.
- Page 4 “tick” for once. 5.1.4 Muting: pressing the power button can abolish the alarm when the SF13PB is on warning condition; it will abolish mute condition automatically if power bank get connection with Apple devices again.
- Page 5 (2) Run “Safeshine Alert” and tap “Add tag”, the system will start searching for “SF13PB”. (3) Taping the power button for about 10 seconds, The SF13PB will tick for 3 times, sounds like “tick-tick tick-tick tick tick”, then double-click on it, the Apple device will show “SF13PB” which means the SF13PB is ready for pairing.
- Page 6 Press “find tag”, the SF13PB will alarm; press “silence tag”, it will stop. Then, the pairing connection is settled. 5.2.3 Using SF13PB to find Apple device Quickly double-click on power button of SF13PB will begin the search for Apple device, and then Apple device will alarm or make a beep sound.
- Page 7 Remarks: If there are problems that “Safeshine Alert” could not get connection automatically with SF13PB, which caused by turning off Bluetooth (e.g. flight mode), there is no need to re-pair, just close the “Safeshine Alert” and restart it, then it will work normally.
- Page 8 SF13PB adopts high quality LI-ION battery core, please rest assured that the use of it. Do not collide, dismantle or pierce the SF13PB; do not through it into fire, water, or other high temperature circumstance; please recharge it with regular brand power adapter. Please stop to use SF13PB if you find that it has bad phenomenon, for example, expansion, etc.
- Page 9 SF13PB intelligent portable power bank Micro USB double function data wire SF13PB user’s manual As there are different needs for accessories at different district, so the above accessories may be different. Please contact us if there are questions. Consultation hot-line: 400-689-1115...
- Page 10 Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.