ARM-GZB208-E1-1 Company Introduction Beijing Anchorfree Technology Co., Ltd. was established in 2003, which is a government-supported high-tech company. In 2008, we took part in China Chamber of International Commerce (CCOIC) and serve as an honorary member. Since its inception, the company has been adhering to the "integrity, pragmatic;...
ARM-GZB208-E1-1 2.4 Safety Device Fuse:When there is more electricity, use will automatically disconnect to protect equipment and person. 2.5 Safety Signs “AC100V-240V 50Hz/60Hz” is power supply Chapter 3 Specifications 3.1 Technical Specifications Working mode ①HR (hair removal) ② SR (skin rejuvenation) Tip kinds 2 kinds Spectra scope...
ARM-GZB208-E1-1 3.3 Tip Type and Operation Items Type Tip size Item Wave length 44mm×16mm Hair removal 530nm-1100nm 44mm×16mm Skin rejuvenation 650nm-1100nm Chapter 4 Installation 4.1 Connect Power Line Connect power line to the host (following picture): 4.2 Change Tip 1) Connect A with A1 and connect B with B1 (following picture) B ...
ARM-GZB208-E1-1 2) The change is finished (following picture) Chapter 5 Operation 5.1 Start Device 1) Connect power supply; indictor light is red and SR or HR will start; 5.2 Operation Board 1) Mode selection: Connect different tips, the equipment will change to relative working mode automatically (SR light means skin rejuvenation mode,HR light means hair removal mode)...
ARM-GZB208-E1-1 5.3 Handpiece Operation key (This is the light in handpiece and the key in handpiece) Start the equipment and press Then the light in handpiece will illuminate; Make the tip touch skin and the lights in handpiece will illuminate; Press the key in the handpiece and then the tip makes shots, three blue lights will flash;...
ARM-GZB208-E1-1 Note: If you maintain and modify this machine without allow, the beauty operator may be in the danger of voltage; The guarantee will be invalid if you use or adjust this machine improperly. Chapter 7 Repair Guide Trouble Troubleshooting Connect the power line well Device could not start Contact with us...
ARM-GZB208-E1-1 Skin rejuvenation:5-7 days each time,can use this device for a long period; 8.2 About Operation 1) Adjust energy level a) Adjust energy level from low to high:Don’t adjust much for one time; b)Test before operation:watch whether the shot is normal before treatment; c) Deep color skin shall use low energy level;...
ARM-GZB208-E1-1 8.4 Result After treatment if skin turns a little red, a little heat and last for long, a little pain, hair is curve, it means the treatment is successful; Normally each treatment needs 1-2 times’ continual shots. 8.5 Discomfortable Feeling During treatment, customer may feel differently;...
Need help?
Do you have a question about the B208 and is the answer not in the manual?
Questions and answers
I only need for face rejuvenation. Do u have 1 just for that without IPL
No. The B208 device uses IPL (Intense Pulsed Light) for both hair removal and skin rejuvenation.
This answer is automatically generated