Summary of Contents for Mocet Communicator mini
- Page 1 IP3093-U Communicator mini Quick User Guide Copyright © 2013, All Rights Reserved. Ver: R02 D/C: 102-1111...
-
Page 2: Federal Communication Commission Interference Statement
MOCET IP3093-U Communicator mini Quick User Guide Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 3 MOCET IP3093-U Communicator mini Quick User Guide You may clean the device using a fine damp cloth. Never use solvents (such as trichloroethylene or acetone), which may damage the device’s plastic surface. Never spray the device with any cleaning product whatsoever.
-
Page 4: What's In The Package
The Communicator mini has a built-in fast charger so you can play and work all day, and when you leave, your tablet or smart phone will be fully charged and ready to go. - Page 5 Google Nexus 7. The default module installed in the Communicator mini is a regular micro-USB connector. You can follow the steps below to change it to the flip-side micro-USB connector module.
- Page 6 MOCET IP3093-U Communicator mini Quick User Guide Step3: Place the Communicator mini on the table, and face to the Smile Face on the flip- side micro-USB connector module, and insert it in the module cave firmly. Adjust the stand Place the Communicator mini on the table and slightly pull the stand apart from the bottom shell to a comfortable viewing position.
- Page 7 Attach the cord of the power adaptor to the 12VDC port on back panel of the Communicator mini. Plug the power cord into an outlet. When it is powered, the LEDs on the front panel of main unit will light up and an alert sound will indicate that the Communicator mini is ready to go.
-
Page 8: Appearance And Buttons
Connect the external microphone IP-MIC (optional) You can connect an external microphone to the MIC IN jack in the back of the Communicator mini to improve the ability of others on a conference call to hear everyone in the room. - Page 9 MOCET IP3093-U Communicator mini Quick User Guide Function Description for Interface of Communicator mini: For audio playing, ring and hands-free talking. Speaker For Mobile device charging when it is seated on the Micro- USB connector. Also, data synchronization supported Micro-USB between your Mobile device and a connected computer at micro-USB port.
- Page 10 If your tablet or smart phone is in a case, please remove it from the case first, and then connect it to the Communicator mini as shown in the figures below. While your mobile device is docked on the Communicator mini, it will start charging automatically.
-
Page 11: Basic Operations
(3) seconds. The Bluetooth connection will disconnect. Basic Operations To use the Communicator mini, your tablet and smart phone not have to be docked; it will either be connected by Bluetooth when in range of the Communicator mini, or connected by the included AUX-in cable*. - Page 12 MOCET IP3093-U Communicator mini Quick User Guide pick up the handset. When a call comes in, the Communicator mini rings. To answer the call, tap the Answer button Switching between devices during a call Switching a call to your Communicator mini...
-
Page 13: Warranty Information
MOCET IP3093-U Communicator mini Quick User Guide You can use the USB port on the left side of the Communicator mini to charge a second device. Using the charging cable included with the second device, connect it to the Communicator mini USB port.
Need help?
Do you have a question about the Communicator mini and is the answer not in the manual?
Questions and answers