Table Of Contents - Singer 212W140 Serivce Manual

Table of Contents

Description3
X-Ray View Of Machine 212W1403
Speed4
Setting Up4
To Oil The Machine4
To Regulate Oil Flow To Hook Raceway4
Needles5
Thread5
To Remove The Bobbins5
To Wind The Bobbin5
To Replace The Bobbin And Thread The Bobbin Cases6
To Set The Needles6
Upper Threading6
To Prepare For Sewing7
Tensions7
To Regulate The Tensions7
To Regulate The Length Of Stitch7
Hints For Perfect Operation8
Thread Controller9
To Set The Needle Bar9
To Adjust Height Of Sewing Hooks9
Adjustment Of Thread Controller9
Relative Positions Of Needle Bar And Presser Bar10
To Set The Sewing Hooks To Or From The Needles10
To Time The Sewing Hooks10
To Remove The Bobbin Cases From The Sewing Hooks11
To Remove The Sewing Hooks From The Machine11
To Remove The Hook Shaft From The Hook Saddle11
To Adjust The Bobbin Case Opener11
To Adjust Timing Of Bobbin Case Opener12
To Raise Or Lower The Feed Dog12
To Remove The Needle Bar Rock Frame12
The Feed Eccentric12
To Replace The Arm Shaft Connection Belt13
Parts List (212W140)15
Instructions For Ordering15
Arm Shaft, Needle Bar And Take-Up Assembly16
Bed Slides, Covers And Miscellaneous Parts18
Presser Bar, Presser Foot And Presser Foot Lifting Assembly20
Tension Complete And Thread Guides22
Lower Feed Assembly With Feed Dog24
Hook/Feed Driving Eccentric Assembly With Hook Saddle Bearings26
Hook And Bobbin Case With Bobbin28
Hook Saddle (Left) Complete30
Hook Saddle (Right) Complete32
Feed Dogs, Needle Holders And Throat Plates34
Presser Feet36
Needle Bar Rock Frame, Rock Shaft And Lubricating Wicks38
Accessories40
Bobbin Winder For "V" Belt Drive42
Knee Lifter44
Thread Unwinder For Three Spools46
Miscellaneous Parts Used In Conjunction With Thread Unwinder46
Fittings48
Feed Dogs And Throat Plates48
Foot Lifter And Machine Pulleys52
Parts Required For Changing From Knee To Foot Lifter52
Strip Reels And Strip Tension Device64
Numerical Parts Of List66