1. Manuals
  2. Brands
  3. NUUO Manuals
  4. I/O Systems
  5. SCB-A08
  6. User manual

NUUO SCB-A08 User Manual

Digital input and relay box with ethernet converter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
A08
All-IN-ONE Network based I/O unit
A08
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SCB-A08 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for NUUO SCB-A08

  • Page 1 User Manual All-IN-ONE Network based I/O unit User Manual...

  • Page 2: Table Of Contents

    2.3.2 Digital Output ............................. 10 3. NETWORK DEPLOYMENT DIAGRAM .................... 11 4. HARDWARE SETUP ........................... 11 4.1. Connect SCB-A08 to Server PC ........................11 4.2. Updating an Existing Installation ........................12 5. USING SEARCH TOOL........................12 5.1. Searching LAN for SCB-A08 ..........................12 5.2.

  • Page 3: Introduction

    1. Introduction User Manual SCB-A08 is an I/O box to intermediate the communication between a surveillance server and multiple peripherals. It joins up all the major components in your surveillance network to deliver your prospective management and protection over your property.

  • Page 4: Key Features

    User Manual 1.1.Key Features 8 inputs (dry contact or wet contact) and 8 relay outputs provided. Supports 10/100 Mbps Ethernet. Status LED for each channels. DIN rail (optional). Supports LAN and WAN communications. In server mode supports individual 8 client sessions (socket). Management access password protected.

  • Page 5: Os Requirement

    Adapter: US Power Adapter DC 12V x1 (EU with EU plug adapter) Warranty card x1 SCB-A08 CD-ROM x1 (including search tool, user manual and troubleshooting) Note: The warranty will only be honored when equipment use original factory shipped power adapters. It will not be...

  • Page 6: Overview

    2. Overview To apply SCB-A08 to your surveillance system, get to know it first. Take a look around SCB-A08. The illustration User Manual below depicts SCB-A08 by top view and side view, with all major components and dimensions called out.
  • Page 7 User Manual Fig. 3. Pin Terminal block RS232 RS422 RS485 RXD(+) RXD(-) TXD(+) D(+) TXD(-) D(-) Fig. 4. Serial port DTE – BD-9 male RS232 RS422 RS485 RXD(-) RXD(+) TXD(+) D(+) TXD(-) D(-) CTS(-) CTS(+) RTS(+) RTS(-)

  • Page 8: Led Definition

    2.1. LED Definition User Manual Name Description Link Green – 100 BaseTX Ethernet connection established Yellow – 10 BaseT Ethernet connection established Flashing Green – system is ready Serial 1 Green – connection established Flashing Green – data is transmitting DI/DO Green –...

  • Page 9: Pin Definition

    2.2. Pin Definition User Manual Name Description RS232/422/485 RS232/422/485 interface support Receive - Receive + Transmit - Transmit + Ground 10/100M 10/100 Mbps Ethernet Dip Switch Reset Hardware reset button 7~30VDC 7~30 VDC support Power Digital input Channel 1 Digital input Channel 2 Digital input Channel 3 Digital input Channel 4 Digital input Channel 5...

  • Page 10: Digital I/O Hardware Connection

    2.3. Digital I/O Hardware Connection User Manual SCB-A08 bottom has eight switches to set Dry Contact and Wet Contact 2.3.1 Digital Input Digital Input Dry contact Digital Input Wet contact...

  • Page 11: Digital Output

    2.3.2 Digital Output User Manual When Relay turn on, DO and CO will be a circuit A. AC source B. DC source 10 -...

  • Page 12: Network Deployment Diagram

    Step 2: On PC, install SCB-A08 search tool. - Insert SCB-A08 CD in CD-ROM will automatically launch the Install Shield Wizard. If the Wizard does not run automatically, please enter Computer and click the CD/DVD ROM. Once search tool is successfully installed, PC auto-detects SCB-A08.

  • Page 13: Updating An Existing Installation

    - Monitoring port status - Saving and loading configuration files Once the SCB-A08 is connected to LAN, the search tool will be able to search LAN for all connected SCB-A08 and will display them in a window by name and IP address.

  • Page 14: Configuration Scb-A08

    Double click SCB-A08 list on SCB Manager search tool and open server properties. Server name: The server name is user configurable. It is recommended users with more than one SCB-A08 connected to the LAN assign a new name to each. When the Manager software searches for SCB-A08 on the LAN it will display the server name allowing the user to distinguish between SCB-A08s.
  • Page 15 SCB-A08 will send a DHCP request to the DHCP server, which will assign a dynamic IP address, netmask, and gateway to the SCB-A08. If a DHCP server is not available on the network the SCB-A08 will time out after 10 seconds and the default values will remain. When DHCP is enabled, the IP address, Netmask and Gateway fields become inaccessible and cannot be changed by the user.
  • Page 16 Ethernet port. If only Delimiter 1 is set (Delimiter 2 is zero or blank), upon receiving Delimiter 1 the SCB-A08 will put all the data in the serial buffer in an Ethernet packet and send it out the Ethernet port.

  • Page 17: Default Value

    5.3.1 Default Value User Manual Model SCB-A08 Server Name SCB-A08 Password DHCP Disable IP Address 192.168.2.1 Netmesk 255.255.255.0 Gateway 192.168.1.254 MAC Address Fixed – see bottom label Baud Rate Serial port1: 9600, Serial port2: 115200 Data/Stop bits Parity None Flow Control...

  • Page 18: Web Server Interface

    5.4. Web Server Interface User Manual The Web Server interface provides the same updating options as Console Mode and Telnet. These are located at the bottom of all three Web Server pages. If a field is changed, you must click Save before leaving that page or the changes will be ignored.

  • Page 19: Upgrading Firmware

    5.5. Upgrading Firmware User Manual New firmware may be available and flashed to SCB-A08 currently in use. The user can upgrade using a direct connection to SCB-A08 serial port. Step 1: Download the new upgrade .hex file and place in a folder.

  • Page 20: Configuration

    5.6. Configuration User Manual Here we take surveillance system—Mainconsole for example: Step 1: Open Mainconsole on PC. Step 2: From Mainconsole tool bar, click button. Step 3: A menu opens. Step 4: Click Setting > System Setting. Step 5: Setting page opens featuring a series of tabs. Step 6: Click I/O Device tab.
  • Page 21 Step 7: In Module field, dub SCB-A08 with a name. User Manual Step 8: By Device, specify SCB-A08 model name. Step 9: By Port, enter 4001 for I/O. Step 10: By ID, select the ID address for SCB-A08. Note: First device selects Addr:01 and so on.

Table of Contents