Cherry CyBo@rd Plus M 83-13900 Quick Start Instructions page 12

DIP switches
5 6 7
on on off
off on off
on off off
off off off
6.1 Setting the frequency channels and
ID codes
Use of multiple CyBo@rd Plus units within 5 m
of each other
If multiple devices of the same model are used
within 5 m of each other on the same frequency,
malfunctions can occur with the transmission of
wireless signals.
Changing the frequency channel/ID code at the
receiver
1 Open the cover on the underside of the wireless
receiver.
2 Using a pointed object, set the DIP switches
1 to 4 to a position which is not used by any
other persons working in your area.
3 If all frequency channel possibilities have
already been used (see table), use DIP switches
5 to 8 to change the ID code.
4 Close the cover.
12
ID
codes
8 No.
off 12
off 13
off 14
off 15
Changing the frequency channel/ID code at the
keyboard
1 Open the battery compartment on the under-
side of the wireless keyboard.
2 Remove the batteries.
The old setting is deleted.
3 Set DIP switches 1 to 8 to match the receiver
using a pointed object.
4 Reinsert the batteries.
The new setting is saved.
5 Close the battery compartment.
Changing the frequency channel/ID code at the
mouse
1 Open the battery compartment on the under-
side of the wireless mouse.
2 Remove the batteries.
3 Set DIP switches 1 to 8 to match the receiver
using a pointed object.
4 Reinsert the batteries.
The new setting is saved.
5 Close the battery compartment.