Subscribe to Our Youtube Channel
Summary of Contents for PYE PCR3
- Page 1 AM/FM Alarm Clock Radio User Manual Model Number: PCR3 READ AND SAVE THESE INSTRUCTIONS...
- Page 2 IMPORTANT Please read and follow the instructions in this user manual even if you feel you are familiar with the product, and find a place to keep it handy for future reference. For your convenience, record the complete model number (located on the product identification plate) and the date you received the product together with your purchase receipt, and attach to the warranty and service information.
- Page 3 • Do not use this appliance outdoors. • Do not let the cord hang over the sharp corners or edges of a bench, table or to touch hot surfaces. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Page 4 WARNINGS RELATING TO THE USE OF BATTERIES • Batteries must be inserted taking care to match the polarities shown. Make sure that the (+) and (-) terminals are placed in the right direction. • Never use batteries that show signs of electrolyte leaks or cracking. •...
- Page 5 power is restored, the display will light up again and alarm time set previously is restored. The battery will maintain timekeeping for approximately 8 hours during power failure or interruption. • The unit can also be operated by batteries during power failure. •...
- Page 6 stations. After selecting the desired setting, press “SET/ PRE/ M+” (4) to select your pre-set frequency to enjoy radio broadcasting. Hold down amd press the “AM/ FM/ ON/ OFF” (1) to turn off the radio. ALARM FUNCTION SETTING ALARM 1 BY BUZZER In clock display mode, press “AL 1/ VOL-”...
- Page 7 • NOTE: Remove the battery if the unit is to be unplugged for a long period of time, avoiding unnecessary battery drain. • NOTE: Never immerse the unit in water or any other liquid. SPECIFICATIONS Rated Power: Power Source: AC 220-240V ~ 50Hz Backup Battery: DC 9V x 1 battery (not included)
Need help?
Do you have a question about the PCR3 and is the answer not in the manual?
Questions and answers
How to cancel the alarm settings
To cancel the alarm on the PYE PCR3, press the "ON/OFF" button. This will stop the alarm, and it will not resume. If you press the "SLEEP/SNOOZE" button instead, the alarm will stop temporarily and resume after 9 minutes.
This answer is automatically generated
How do I disable radio alarms on clock radio red dots are showing on both A1 & A2 on front screen - PYE PCR3 Model
To disable the radio alarms on the PYE PCR3 clock radio when red dots are showing on both A1 and A2:
1. In clock display mode, press the “AL 1/ VOL-” (5) button repeatedly until the “RADIO AL1” icon turns off.
2. Press the “AL 2/ VOL+” (6) button repeatedly until the “RADIO AL2” icon turns off.
This will disable the radio alarms for both Alarm 1 and Alarm 2.
This answer is automatically generated
I cannot get the radio to operate at all . I only want one station am 693 have I pressed wrong buttons in presets or anything?
To tune into AM 693 on the PYE PCR3 radio:
1. Turn on the radio using the “AM/FM/ON/OFF” button.
2. Select the AM band.
3. Use the “HOUR/TU-” or “MIN/TU+” buttons to tune the frequency.
4. Stop when the display shows 693 KHz.
AM 693 falls within the supported AM range of 522–1620 KHz.
This answer is automatically generated
How to stop alarm buzzer2 from working at all
To disable the alarm buzzer on the PYE PCR3, press the “AM/ FM/ ON/ OFF” (1) button when the alarm sounds. This will stop the alarm, and it will not resume.
This answer is automatically generated