Advertisement
Quick Links
Advertisement
Summary of Contents for Water Filter Tree WLF-RO5
- Page 1 INSTALLATION, AND OPERATION MANUAL Model: WLF-RO5 5 STAGE REVERSE OSMOSIS SYSTEM...
- Page 2 Thank you for purchasing the WLF-RO5 Reverse Osmosis (RO) water purification system The WLF-RO5 is a 5 stage Reverse Osmosis system designed to reduce high amounts of contaminants found in municipal drinking water including Sediment, Chlorine Taste and Odor, Copper, TDS, Chromium, Fluoride, Lead, Mercury, Arsenic, Chromium, Cryptosporidium or Giardia.
- Page 3 1 Transformer 1 RO Module (complete with filters) 1 Parts Bag 1 Pump - Installed 1 Faucet Bag/Box 1 Manual 1 Filter Housing Wrench If any of the items are missing please contact Water Filter Tree customer support prior to installing.
- Page 4 System diagram...
- Page 5 Parts List Diagram Part Name Part Number Description Number Valve that fits onto the cold water supply line. The valve has a tube that attaches to the inlet side of the RO pre Cold Water Valve WFT-CWV01 filter. This is the water source for the RO system. Shuts off the mains water supply to the system Water Shut-Off Ball WFT-...
- Page 6 Faucet Installation WARNING: Serious cracking and damage may occur to your sink even if instructions are followed exactly due to age and the imperfections inherent in natural materials. Instructions may not apply exactly to your sink. Use caution – sink may be slippery. Note: Most sinks are pre drilled with 1 ¼”...
- Page 7 Cold Water Valve Installation Caution: Water supply line to the system must be from the cold water supply line only. Hot water will severely damage your system. Turn off the cold water supply to the faucet by turning the cold water valve completely off.
- Page 8 Drain Saddle Installation Drain Saddle (Not Supplied) should fit standard 1 ¼” – 1 ½” drain pipes Caution: If you have a garbage disposal, do not install the drain saddle near it. Installation of the drain saddle must be either above the garbage disposal, or if a second sink drain is available, install it above the cross bar on the second drain.
- Page 9 Main Connections Installation Diagram Input Instructions Having installed the cold water feed and the Water Shut-Off Valve ②, you will now need to connect a 1/4” pipe between the Water-Shut Off Valve ② and the Stage 1 Sediment Filter Housing ③ input shown in Blue (Feed Water IN).
- Page 10 Starting up the Unit Warning: To prevent the possibility of electrical shock, clean up any water under the sink and around the RO System with a dry cloth. Note: This unit has a built in Booster Pump, Solenoid Valve, and Pressure Switch and therefore no further component installation is required.
- Page 11 the O-Ring is still in place before tightening. 9. Once all the filters are installed, make sure there is no water on or around the unit. Dry the surfaces with a dry cloth. Caution: Failure to do this may result in electric shock, bodily injury, fire, product failure, or damage 10.
- Page 12 Sanitizing the Equipment 1. If sanitizing the unit, remove all the old filters (Stage 1, 2, 3, 4) from their housings and discard leaving the inline filter (Stage 5) in place. Please see the Yearly Maintenance Section on how to remove housings and filters.
- Page 13 Please refer to this manual for proper maintenance and operated as specified in this owner’s manual, there is a risk of exposure to contaminants Water Filter Tree is a Trademark of Vectornate USA Inc. All Rights reserved. Customer Service: info@waterfiltertree.com...
Need help?
Do you have a question about the WLF-RO5 and is the answer not in the manual?
Questions and answers