Brehon Agrisystems G. Force User Manual

Rev 06131
G. Force
Remote Control Systems
INTEGRATED RECEIVER/ENDGATE and
HOIST DRIVER CONTROL MANUAL
G. Force
The Remote Control is designed to provide the ultimate in convenience and safety to
perform tasks remotely. It is a radio frequency (RF) controlled device that allows operation of a
gate, chute, etc. from a hand held transmitter operated remotely. The Transmitter, which operates at
418 MHz FM, transmits encoded information to the Receiver, which then decodes the information
and performs the desired function. When coupled with motor/driver, this system may be used to
operate a swinging gate, raise a chute, open a valve, etc. The Transmitter and Receiver are designed
to operate within 300' but actual range is dependent on operating environment.
Features :
 Simplicity of design and quality of engineering.
 User selectable security code.
 Power On/Off switch on Receiver.
 LED Indicator lights.
 9v Transmitter Battery
 Ease of installation/removal.
 All controls can be by either Manual Keypad or Remote Control
 Multiple Transmitters can operate a single Receiver.
 Multiple Receivers can be operated by a single Transmitter.
 Up to 4 different Channels can be operated by one Receiver
Manufactured By:
Brehon Agrisystems Inc. is not responsible or liable for indirect, special, or consequential damages arising out of or in
connection with the use or performance of the product or other damage with respect to any economic loss, loss of
property, loss of revenue or profit, or costs of removal, installation, or reinstallation.
Brehon Agrisystems Inc.
102 – 2750 Faithfull Ave.
Saskatoon, SK S7K 6M6
(306) 933 2655 phone/fax
Email: garth.brehon@sasktel.net Web: www.brehonag.com
1