Installing The Battery; Low-Voltage Alarming Function; Contents; System Requirements - Targus KB55 User Manual

Targus KB55 Multi-Platform Bluetooth Keyboard

Installing the battery

1. Remove the battery cover located on the
bottom of the keyboard.
2. Insert the supplied batteries, making
sure that the positive (+) and negative (-)
ends of each battery match the polarity
indicators inside the battery compartment.

Low-voltage alarming function

When the battery has been used for a long time and the battery power is low, the low power
indicator light on the top right corner of the keyboard will alarm - "flicker" to remind the user
to replace the battery.

Contents

• Multi-Platform Bluetooth Keyboard
• AAA alkaline battery x 2
• User manual

System requirements

• Windows 10, Windows 8, Windows 7, Windows
® ® ®
• Mac OS X 10.6 - 10.12.3
®
• Android 4.4 - 6.0.1
1
Vista, XP, 2000
®
folding line
2 staples here (saddle stitching)
Targus KB55 Multi-Platform Bluetooth Keyboard
Establishing Pairing
Power button
1. Turn on the keyboard by sliding the power button to the ON position.
2. Switch ON the Bluetooth function of device and turn on Bluetooth search mode.
3. Press the Connect button on the back of your Targus Multi-Platform Bluetooth Keyboard
to enable discovery mode. The low power indicator light will flash red when the keyboard
is in discovery mode.
4. Tap "Multi-Platform Bluetooth Keyboard" in the bluetooth search menu on your device.
5. The pairing will start automatically.
6. The Multi-Platform Bluetooth Keyboard is now connected with your device and the red
light will stop flashing.
Note: Press fn + IOS/Android/ Windows to meet device's OS after pairing.
folding line
2 staples here (saddle stitching)
Connect button
2