Advertisement
Advertisement
Table of Contents
Summary of Contents for Homestar TED28 BC
- Page 1 Scan the below QR code to download Smart Flame. 1-855-837-2569...
- Page 2 fire, electric shock or injury to persons. licensed tap (outlet/power strip). 19.The heater has a safety device that makes it stop working once the inner temperature reaches 85º (± 2°C). To reset the appliance, turn heater off and disconnect power, let it cool off for 10 minutes and plug back in.
- Page 3 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 4 OPERATING INSTRUCTIONS Control Panel Indicators Figure 2 When a function is changed from the control panel or remote there will be a corresponding indicator displayed. The indicator shows the function changed and the level selected. When the function is turned off, the corresponding indicator will fade off. Figure 3...
-
Page 5: Icon Description
OPERATING INSTRUCTIONS FUNCTION ICON DESCRIPTION This button will not only put the fireplace insert in a standby mode, but also you can see the flame effect through the screen. This will turn off all functins at once. POWER Note: Holding the POWER button for 3 seconds will turn on the Child safety lock. It disables or enables all functions on the control panel and remote control. - Page 6 OPERATING INSTRUCTIONS Bluetooth Operation Instructions as below. Please make sure has been opened. 1. Scan the below QR code to download Smart Flame or search “Smart Flame” from Apple AP P Store and Google Play Store to download. 2. Register an account with your cellphone number or email adress. 3.
- Page 7 OPERATING INSTRUCTIONS FUNCTION ICON DESCRIPTION Press this botton to connect the unit and also return back to the Device list interface. BLUETOOTH This button will not only put the fireplace insert in a standby mode, but also you can POWER see the flame effect through the screen.
-
Page 8: Troubleshooting Guide
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Inspect the heater and check that the air inlets and outlets are not blocked as this may cause overheating. Unplug the heater Manual Reset overheat Display shows “E1”. for 10 minutes and allow it to cool down. Plug back in and turn protection has triggered. -
Page 9: Replacing The Remote Control Battery
INSTRUCTIONS cleaning the appliance. REPLACING THE REMOTE DISPOSING OF USED CONTROL BATTERY BATTERIES When the remote control stops operating or its range seems reduced, The batteries may contain hazardous substances that could it is time to replace the battery with new ones. endanger the enviroment and human health. - Page 10 BIG LOTS BIG LOTS. yourself. 1-855-837-2569...
Need help?
Do you have a question about the TED28 BC and is the answer not in the manual?
Questions and answers