Felling - Singer 127-3 & 128-3 Instruction Manual

FOOT HEMMER -- Felling
The two pieces of cloth to be felled should be
laid one over the other, right sides together,
the edge of the under piece being a little far-
ther to the right than the upper piece. Stitch
them together, using the hemmer as a press-
er foot, the front end of the hemmer forming a
guide for the edges of both pieces, the upper
piece being guided by the inside and the
under piece by the outside of the projecting
front of the foot hemmer (see Fig. 20). Then
open the work out flat, wrong side up, the
edges standing up straight, and taking the
edges near the beginning of the seam in the
right hand, and the ends of the threads in the
left hand draw the edges into the hemmer
which will turn them as in hemming. Guide
the second row of stitching by following the
first row with the inside of the projecting front
of the foot hemmer (see Fig. 21).
Table of Contents
127-3 & 128-3
17
FIG. 20.
FIG. 21.
Previous Page | Next Page