Advertisement
.exclusively via an isolating trans-
former. Please ask your electri-
cian.
.In Switzerland mobile appliances
which are used outdoors, must
be connected via a circuit breaker
safety switch.
.Make sure that connections are
made in an area protected from
floodings.
.Before operating the pump,
first make a viusal check, if there
is any damage (esp. regarding
power cable and plug).
A damaged appliance must
not be used. In case of damage,
please have the Float Switch
checked by our GARDENA
Service Centre or by an
authorised electrician.
.Check line voltage. The Float
Switch must only be connected to
230 V / 50 / 60 Hz a.c. (alternating
current) sockets. Attention , only
use with devices with a power
input of max. 10 (4) A.
EU Certificate of Conformity
The undersigned
GARDENA Manufacturing GmbH · Hans-Lorenser-Str. 40 · D-89079 Ulm
hereby certifies that, when leaving our factory, the unit indicated below is in
accordance with the harmonised EU guidelines, EU standards of safety and
product specific standards.
This certificate becomes void if the unit is modified without our approval.
Description of the unit:
Float Switch
Art. No.: 1735
EU directives:
Machinery Directive 89 / 392 / EC
mod. 91/ 368 / EC
Electromagnetic Compatibility
89 / 336 / EC
8
We expressly point out that, in ac-
cordance with the product liability
law, we are not liable for any
damage caused by our units if it is
due to improper repair or if parts ex-
changed are not original GARDENA
parts or parts approved by us, and,
if the repairs were not carried out
by a GARDENA Service Centre or
an authorised specialist. The same
applies to spare parts and acces-
sories.
6. Putting into Storage
.Before the first frost sets in, re-
move the Float Switch from the
water reservoir and store it in
frost-resistant place.
Disposal
(in accordance with RL2002 / 96 / EC)
The product must not be
added to normal house-
hold waste. It must be
disposed of properly.
Year of CE marking: 1996
Ulm, 28.01.1997
J. Katzer
Technical Dept. Manager
Advertisement
