Using The Vacuum Cleaner - Dometic CV1004 Installation And Operating Manual

Using the vacuum cleaner

A
NOTICE!
The bolts on the housing must not be screwed out completely because
they are fitted with a spring mechanism.
➤ Mount the vacuum cleaner (fig. 4, page 4 to fig. 0, page 5).
I
NOTE
The mounting connectors (fig. 3 1, page 4) need to be glued on the
device-side using a standard adhesive. The screw connectors (fig. 3 2,
page 4) are screwed into the connection hose and inserted into the
mounting connectors.
➤ Mount the hose socket and route the connection hose (fig. a, page 5, and
fig. b, page 5).
Connecting electrical power to the vacuum cleaner
➤ Connect the orange-coloured 24 Vg cables on the rear of the device to the
contacts on the hose socket (fig. c, page 6).
!
WARNING!
Danger of electrocution and serious injury.
Only use the 230 V connection cable supplied.
➤ Connect the 230 V connection cable to a suitable socket (fig. d, page 6).
8 Using the vacuum cleaner
A
NOTICE!
• Do not use the vacuum cleaner without a dust bag or motor filter.
• Only use spare parts and accessories recommended by the
manufacturer.
14
CV1004
EN