Chapter 1 Outline; Hardware Configuration; System Configuration - Denso 1732 Series User Manual

Chapter 1 Outline

1.1 Hardware Configuration

This product line (hereinafter referred to as the Transceiver) is developed for the Rockwell Automation
"1732 series" products to read and write the HF (High Frequency) RFID tag.
As listed below, two versions of the transceivers are added.
type
M18 type transceiver
M30 type transceiver
Nut, Washer
(Attachment)

1.2 System Configuration

The transceiver is intended to operate in the following system configuration.
Programmable
Controller (PLC)
DC24V Power Supply
model
56RF-TR-M18
56RF-TR-M30
- T.B.D
I/F Box
(equivalent to "1732")
appearance
Transceiver
Shielded Cable
1