Philips SL400 Instructions For Use Manual page 25

SL400i37_Booklet.qxd 02-04-2004 13:44 Pagina 25
Problem
The SL400i does not respond to any of the
buttons including the standby button.
The Sl400i switches to standby with the
Power-LED flashing on and off.
Problem
The Installation CD will not start.
The software will not install.
No wireless connection or intermittent drop-out
of the wireless connection.
Pressing the PC LINK button produces an empty
content screen on your television.
Possible cause
Internal error.
The SL400i has a thermal shutdown
that shuts down the set when
the internal temperature
exceeds a certain threshold.
6.2 PC / Network problems
Check the Support section on www.philips.com/streamium for the latest information on
problem solving.
Possible cause
Autorun disabled for your drive.
Wrong operating system.
Wireless signal range, speed, and
strength can be affected by
interference from neighbouring
wireless networks and devices.
Electro-magnetic devices such as
televisions, radios, microwave ovens,
and cordless telephones, especially
those with frequencies in the
2.4 GHz range, may also interfere
with wireless transmission.
PC is switched off.
The Media Manager software is not
running.
No wireless network adapter
connected or range too long
(weak radio signal).
Network host (PC) or wireless base
station is switched off.
Your Wireless Base Station/network
router employs MAC filtering and
prevents the SL400i from connecting
to your network.
Not enough USB bandwidth available If you share the USB bandwidth with other heavy
for your wireless USB adapter.
Radio interference from other
(wireless) devices.
(Wireless) network problems.
ENGLISH
Solution
Unplug the mains and wait at least 10 seconds
before reconnecting it.
Disconnect the mains, let the set cool down, improve
ventilation, and reconnect the set to the mains.
Solution
Double-click 'My Computer', then the CD-ROM
drive icon and finally 'Setup.exe' to start the CD.
Go to www.philips.com/streamium to see which
operating systems are supported.
Switch off wireless devices that interfere with your
wireless network connection.
Switch on your PC.
Start the Media Manager software.
Connect the wireless network adapter to your PC or
reposition your Wireless USB adapter.You may check
the link quality by pressing the MENU button and
selecting Network > Wireless Info > Signal Level.
Make sure your home network is operational before you
try to contact a networked computer with the SL400i.
Add the SL400i MAC address to the list of devices that
may connect to your Base Station/Gateway router. (See
its user manual for how to do this.) Press the MENU
button and select: Network > Wireless Info > NIC
MAC Address to see the wireless MAC address.
USB bandwidth users (like USB cameras, scanners or
ReWritable drives, etc.), the remaining bandwidth may
not be enough.
Check whether a wireless connection can be
established with other devices switched off.
(e.g. microwave ovens, other wireless devices, etc.)
See advanced network problem solving on page
51-52 of the extended User Manual on CD-ROM.
25