55LW5600
Understanding the Host Diagnostic Screen (Page 2 of 2)
Model Name : 55LW5600-UA (Liquid Crystal Display)
FLASH : 524288 KB
DRAM : 524288 KB
NVM : 128 KB
Firmware Version(PQ) : 2.02.07.01(25329)
Micom Version : V2.21.2
Compile Date & Time : 20101130 & 08:45:52
Compile User : hellyhorse.kang
Center Frequency : 663.00 MHz
PCR lock : Locked
Modulation mode : QAM 256
Carrier lock status : Locked
SNR : 37 dB
Signal level : 100%
Host Diagnostics
Host Information
Memory
Host Release Version
FAT Status (Main)
Channel Frequency
Program Clock Reference (Locked or No)
Channel Type (8VSB, QAM 64, 256)
Channel (Locked or Unlocked)
Channel Signal to Noise Ratio
Channel Signal Level (Above 80% good)
Half Page
Channel
Selected
Channel Info : Digital 19-1
Parental Control : Channel is not blocked
Can't display this information now
Software
Wireless Host Ver:0.00.0
Version
Wireless B/B Ver:0.00.0
RF Region Config : Not Configured
Media Box Type : Not Configured
RF Frequency (Value):Auto (N.A.)
Uplink RF Power gain (Value):Auto (Min 0)
Downlink RF Power gain (Value):Auto:Auto (Min 0)
Link Mode : Unicast
RX MAC Address : ff:ff:ff:ff:ff:ff
TX MAC Address : ff:ff:ff:ff:ff:ff
Wireless connection status : Disconnected
Average SNR [Db] : 0.0 (0)
QAM 64 (Above 24 is good)
QAM 256 (Above 30 is good)
Move Page
CH
23
Blocked or
Current Channel (Main)
Not Blocked
DVI/HDMI Status
Wireless ready Status
8VSB (Above 20 is good)
Exit
July 2011
LCD-DV 47LW5600