1. Manuals
  2. Brands
  3. Woodsonix Manuals
  4. Test Equipment
  5. SB800U
  6. Operating manual and technical information

Woodsonix SB800U Operating Manual And Technical Information

Ultrasonic test unit
Hide thumbs
1
2
3
4
5
6
7
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
SB800/SB800U
Ultrasonic Test Unit
Operating Guide and Technical Information
Please read this documentation
before operating the SB800/SB800U
SB800/SB800U
Model No:
Display Unit Serial No:
Transmitter Probe Serial No:
Receiver Probe Serial No:
Quality Assurance Completed:
Manual code: SB800INST3.1
Manual date: October 2014
Copyright© 2014 Woodsonix Limited

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SB800U and is the answer not in the manual?

Questions and answers

Summary of Contents for Woodsonix SB800U

  • Page 1 Ultrasonic Test Unit Display Unit Serial No: Transmitter Probe Serial No: Operating Guide and Technical Information Receiver Probe Serial No: Quality Assurance Completed: Manual code: SB800INST3.1 Manual date: October 2014 Please read this documentation Copyright© 2014 Woodsonix Limited before operating the SB800/SB800U...
  • Page 2 SB800/SB800U Ultrasonic Test Unit Please check your package contents include:  Operating Guide and Technical Information manual.  Carry case containing transmitter probe, receiver probe and display unit.

  • Page 3: Operating Instructions

    Figure 2. Reading portion of the display All intellectual property relating to the concept, design and implementation of the SB800 hardware and software belongs to Woodsonix Limited. Copyright, patent, With the display unit turned on and the probes held apart, the screen should and other infringements will be dealt with aggressively.

  • Page 4: Battery Replacement

    4.3 Previous Reading 6. Battery Replacement The number in the top right of the display-module screen represents the most Each battery indicator is shown as a solid rectangle when the batteries are fully recent good reading. Its display position is shown in figure 3. charged.
  • Page 5 The SB800 unit complies with AS/NZS 4268. It is approved for operation within Australia and New Zealand. The SB800U unit complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 6  Physical damage  Wear and tear  Damage caused by careless or rough use  Water damage  Excessive contamination with dust  Incorrect connection of batteries or voltage sources  Exposure to excessively high or low temperatures If a unit is under warranty, but the repair is due to unwarranted use, a charge will be made.
  • Page 7 Ultrasonic transmitter: Piezo-ceramic transducer Postal Address: PO Box 491, Drury, Auckland 2247, New Zealand SB800 = 433.920MHz Radio frequency: Telephone: +64 9 294 8282 SB800U = 914.50MHz Facsimile: +64 9 294 8584 Radiated power (e.i.r.p.) < 1mW www.woodsonix.com Nominal operating current:...

This manual is also suitable for:

Sb800

Table of Contents