GEMAR Lumitec GLT Audio Column 7 Operation Manual

Introduction:

Congratulations on your purchase of the GLT Audio Column 7 multi-function, engineered and

manufactured by us. The Column 7 includes a high-output compression driver, and 12" woofer that

produces an even and smooth studio quality sound in a sound reinforcement speaker. Our design goal

was to build a speaker with accurate playback, smooth dispersion of mid and high frequencies, and an

ergonomic design for easy transport and setup. The result is a sound reinforcement system dynamic

enough to use at home, in the studio, parties or in a home theater.

•

2-way Active Speaker

•

Steel basket woofer

•

High wattage powered amplifier

•

Auxiliary line input

•

High Temperature Voice Coil

•

Bluetooth Stereo Pairing

•

Built-in DSP Processer

•

USB Charging

[Hier eingeben]

OPERATIONS MANUAL

GLT Audio Column 7

Code 102903

Table of Contents

Do you have a question about the GLT Audio Column 7 and is the answer not in the manual?

Page 1 Code 102903 Introduction: Congratulations on your purchase of the GLT Audio Column 7 multi-function, engineered and manufactured by us. The Column 7 includes a high-output compression driver, and 12” woofer that produces an even and smooth studio quality sound in a sound reinforcement speaker. Our design goal was to build a speaker with accurate playback, smooth dispersion of mid and high frequencies, and an ergonomic design for easy transport and setup.
Page 2: Important Safety Instructions
Important Safety Instructions: • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. Do not use this apparatus near water. • • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. •...
Page 3 Functions: 1. USB Port. 2. Bluetooth Stereo Function. 3. Power Indicator 4. Limit: Lights up if the loudspeaker system is operating in the clipping range. A short flash of the LED is not critical. To protect the system, an excessive signal level is gently turned down by the built-in limiter.
Page 4 6. LEDs flash while pairing or linking. LEDs light solid when paired or linked. 7. To reset pairing and linking, press and hold either button for 2 seconds. NOTE: Initial pairing or linking may require 1 minute. Gemar Lumitec SASU 13 Rue Alfred Kastler – ZI 67850 HERRLISHEIM FRANCE Tel: +33 3.88.96.80.90...

102903