Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for OTbeat Burn
- Page 1 Quick Start Guide...
-
Page 2: Getting Started
7. Caring for Device 8. Technical Specifications Getting Started: 1. Included in packaging: OTbeat Burn, SM band, LG band, & USB cord 2. Remove OTbeat Burn from packaging 3. Connect USB cord into charging port of device 4. LED light will appear after a few seconds Downloading the Orangetheory App: *Using your mobile device, download the Orangetheory App. -
Page 3: Charging Device
2. Plug in mini-USB connector into device port 3. Plug in regular USB connector into charging block 4. Plug in charging block into wall outlet (BACK OF OTBEAT BURN) Optical heart rate sensor LED lights Device can be connected directly to a computer USB port. - Page 4 Proper Placement: To transmit accurate data from your device: 1. Fasten device snugly in one of the below placement options 2. Wear device below, and not directly on top, of wrist bone* or elbow 3. The optical sensor on the back should make good contact with skin *For placement on wrist, measure two fingers above wrist bone -------------------- Elbow...
-
Page 5: Pairing Device
Pairing Device: 1. Once OTbeat Burn is fully charged, press center of splat to power ON the device Event LED light Set power ON: Short button press (Blue LED blinks for 5 seconds) Set power OFF: Long button press (Red LED light continuously on for 2 seconds then turns off) - Page 6 Pairing Device (Cont.): 2. Launch the settings app on your mobile device 3. Ensure your bluetooth settings are on Page 6...
- Page 7 Pairing Device (Cont): 4. Open Orangetheory app on mobile phone. Page 7...
- Page 8 Pairing Device (Cont.): 5. Use the Orangetheory app to search for device *Once device appears, OTbeat Burn is successfully connected to app Page 8...
- Page 9 Guide: Heart Rate Detection LED Indication: Alternating BLUE and GREEN: Detecting heart rate Alternating BLUE and RED: No heart rate detected Blinking GREEN: Heart rate detected Blinking ORANGE: Heart rate zones are changing Bluetooth Connection State: Blue LED blinks for 5 seconds: After turning on the unit Blue LED continuously on for 5 second: Connected Green LED on for 2 seconds: Connected (HR not detected) Green LED continuously on: Updating firmware...
- Page 10 3. Use a cotton swab and only rubbing alcohol to clean the USB charging contacts when necessary: do not contact USB charging port 4. Do not use any abrasive chemicals to clean the Otbeat Burn unit, sensor, or strap. This will cause permanent damage Page 10...
-
Page 11: Technical Specifications
Technical Specifications: Feature Description Functions heart rate detection and transmission (ANT+ or Bluetooth 4.0), battery low alert 30 to 220 BPM in 1 BPM resolution Heart Rate Range Heart Rate Accuracy +/-5 BPM Transmission ANT+ /BLE Power Supply 3.8V Li-ion Polymer rechargeable battery ANT+ or BLE 15 Meters Transmission Distance... - Page 12 For more information visit orangetheoryfitness.com/otbeat burn...
- Page 13 2018-5-8 GM18167 (date) (order number) FD063 OTbeat (brand) (Company Model) (Customer model) 17.03.09.00130 说明书 (version) (design content) (Part No) (structural engineer) (electronics engineer) (software engineer) (Designers) (standardization) (project manager) (approve) (Review) (Sales) 规格尺寸 展开尺寸：172*86mm，成型尺寸：86*86mm SIZE 材质要求 70g哑粉纸 MATERIAL 印刷要求 单黑印刷...
Need help?
Do you have a question about the Burn and is the answer not in the manual?
Questions and answers