Smith Light Traveller Operating Instructions Manual

Advertisement

Quick Links

TRAVELLER
Contents
Page 2, Equipment Safety Guidelines
Page 3, Introduction
Page 4-5, Charging
Page 6, Operating Instructions
Page 7, Battery Performance
Page 8, Battery Removal
Page 8, LED Replacement
Page 9, Specifications
Page 10, Spare Parts
Page 10, Colour Lens/Filters
Page 11-12, Product Warranty
SMITH LIGHT - OPERATING MANUAL – Model: Traveller
PATENT PENDING 2008 904 852
1.

Equipment Safety Guidelines

a) Every year many accidents occur which could have been avoided by a few seconds of thought
and adopting a more careful approach when planning a job or simply using equipment. You as the
operator can avoid many accidents or even damage to the equipment by observing and following
the precautions and instructions contained in this manual.
b) Ensure that you have fully read and understand this manual prior to setting up, installing or
operating the equipment.
c) Never operate this equipment if under the influence of alcohol or drugs.
d) This equipment is only to be operated by a competent person.
e) If the ability of this equipment to carry out its intended function is in doubt then remove it from
service and return it to an authorized distributor for repair.
f) When charging from mains power, please ensure that the charging procedure is adhered to, and
only charge with a power supply between 100v-240v, if supplying power outside this voltage
range it may cause serious injury or damage to the equipment.
g) Never allow any person to mount, use or charge this equipment until they have developed a
thorough understanding of safety precautions and how it operates.
h) In some states, territories or work sites, operator training or equipment documentation may be
required. Please check with your local regulatory authority prior to use.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Traveller and is the answer not in the manual?

Questions and answers

Summary of Contents for Smith Light Traveller

  • Page 1 Page 10, Spare Parts Page 10, Colour Lens/Filters Page 11-12, Product Warranty SMITH LIGHT - OPERATING MANUAL – Model: Traveller PATENT PENDING 2008 904 852 Equipment Safety Guidelines a) Every year many accidents occur which could have been avoided by a few seconds of thought and adopting a more careful approach when planning a job or simply using equipment.
  • Page 2 Solar panel is an option and not included as a standard item. To charge your Smith Light, ensure that it is placed on a firm level surface. Open the lid of the Smith Light by pushing the button in the middle of the carry handle, raise the light head, Lift the sealed storage lid located inside the body of the Smith Light, the storage area contains both chargers;...
  • Page 3: Operating Instructions

    Black main power switch for complete shutdown. To close the Smith Light, push the button in the middle of the handle, hold in, lower the lid of the Traveller until the lid meets the top of the light body, release button, and you will hear and feel the locking pins go into place, it is then locked in the closed position allowing you to carry the fully integrated Smith Light, ready for your next job.
  • Page 4 Figures based on a fully charged battery, the LED light source supplied with the Smith Light has approximately 60,000 life hours when the light is used in accordance with this manual.
  • Page 5: Specifications

    11-12 hours Full Recharge Time 7-8 hours 8. Spare Parts Replacement parts are available from Smith Light distributors (Please check our website for your nearest distributor) or consult your place of purchase. 9. Accessories Colour Lens/Filters A, Green, Amber, Red (set of 3)
  • Page 6 The Smith Light is covered by a 12 month Limited Warranty (the “Smith Light International Warranty”). Proof of Purchase The Smith Light International Warranty can only be claimed with a copy of the dated sales receipt as proof of purchase. The Smith Light International Warranty...
  • Page 7 Distributor's jurisdiction that impact on the distribution of the Smith Light in such jurisdiction. Should such laws impact on such issues as labeling, registration or certification of the product or warranties, it is the responsibility of the Distributor to provide full details of such issues to Smith Light International before orders are placed.

Table of Contents