Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Suritel ARCAM
- Page 1 ARCAM Spy Camera Detector USER'S MANUAL...
- Page 2 Optical Detectors or NLJDs. ARCAM does not require the operator to thoroughly and slowly search the entire premises or a person, it takes seconds for ARCAM to tell if there are any cameras which could then be easily localized. Operating principle...
- Page 3 Touch screen type colour, 74 mm Battery Li-Pol, 4100 mAh Physical dimensions 85 х 140 х 30 mm Weight (with antenna) not more than 300 g Operating temperatures from - 10°С to + 40 °С ARCAM overview Page 3 of 7...
- Page 4 Working with ARCAM 1. You can turn ARCAM on by pressing and holding the on/off button located on the right side. You can release the button as soon as you see the loading screen. (the firmware version is displayed at the bottom of the loading screen) Upon successful loading, ARCAM automatically starts scanning the spectrum.
- Page 5 Adding white-listed cell to permanent memory If you want a white-listed cell to be kept in ARCAM's memory even after it will be turned off, you will need to add this cell to permanent memory.
- Page 6 Note! Updating your firmware will erase even permanently stored cells! Turning off and charging. 3. You can turn ARCAM off by pressing and holding the on/off button located on the right side. You can release the button as soon as you see the "Power Off" message.
- Page 7 Upon successful calibration, the ARCAM will load the "main screen". You can access touch panel calibration screen by pressing and holding the screen during loading after turning ARCAM on.
Need help?
Do you have a question about the ARCAM and is the answer not in the manual?
Questions and answers