General Precautions - HTC BL R120 Safety And Regulatory Manual

6 Safety and regulatory guide
alternatives
Electrical safety
 Accessories
 Use only approved accessories.
 Do not connect with incompatible products or accessories.
 Faulty and damaged products
 Do not attempt to disassemble this product or its accessory.
 Only qualified personnel must service or repair this product or its
accessory.

General precautions

You alone are responsible for how you use your product and any
consequences of its use. You must always switch off your product
wherever the use of a product is prohibited. Use of your product is subject
to safety measures designed to protect users and their environment.
 Avoid applying excessive pressure to the device
Do not apply excessive pressure on the screen and the device to
prevent damaging them and remove the device from your pants' pocket
before sitting down. It is also recommended that you store the device in
a protective case and only use the device stylus or your finger when
interacting with the touch screen. Cracked display screens due to
improper handling are not covered by the warranty.
 Protect your product
 Always treat your product and its accessories with care and keep
them in a clean and dust-free place.
 Do not expose your product or its accessories to open flames or lit
tobacco products.
 Do not drop, throw or try to bend your product or its accessories.
 Do not use harsh chemicals, cleaning solvents, or aerosols to clean
the device or its accessories.
 Do not paint your product or its accessories.
 Do not attempt to disassemble your product or its accessories, only
authorised personnel must do so.
 Store your product or its accessories at temperatures between 0°C to
40°C.
 Please check local regulations for disposal of electronic products.
 Do not carry your product in your back pocket as it could break when
you sit down.
 Damage requiring service
Unplug the product from the electrical outlet and refer servicing to an
authorized service technician or provider under the following conditions:
 The product has been exposed to rain or liquid, dropped, subject to