Download Print this page

Pro-Tech Steel Edge Sno Pusher ISL Owner's Manual

Loader, backhoe and iss skidsteer models

Advertisement

Quick Links

Pro-Tech Steel Edge Sno Pusher
®
Owner's Guide
ISL (loader), ISB (backhoe) and ISS (skidsteer) Models
Pro-Tech Manufacturing and Distribution, Inc.
711 West Ave ▪ Rochester, New York 14611
888-787-4766
www.snopusher.com

Advertisement

loading

Summary of Contents for Pro-Tech Steel Edge Sno Pusher ISL

  • Page 1 Pro-Tech Steel Edge Sno Pusher ® Owner’s Guide ISL (loader), ISB (backhoe) and ISS (skidsteer) Models Pro-Tech Manufacturing and Distribution, Inc. 711 West Ave ▪ Rochester, New York 14611 888-787-4766 www.snopusher.com...
  • Page 2 BOTH wear shoes are resting squarely on the plowing surface. In addition, Pro-Tech also sells a level gauge and self-leveling shoes that assist in keeping the Sno Pusher level. 3. To ensure proper surface contact drive...
  • Page 3 ATTACHING THE SNO PUSHER: ISL and ISB models Attaching the Sno Pusher to your machine is made easy with Pro-Tech’s Quick Change™ Design. 1. Drive the cutting edge of machine’s bucket into the post receptacle on the back of the Figure 2a Sno Pusher.
  • Page 4 1 – 3/8” Heavy Duty Ratchet Binder 2 – 3/8” Shackles ATTACHING THE SNO PUSHER: ISS model Your Pro-Tech Sno Pusher® Skidsteer Model (ISS) is equipped with a universal quick coupler 1. Remove the bucket from your skid-steer 2. Drive machine into the adapter located on the back of the Sno Pusher.
  • Page 5 (4) Tighten fourth at 240 ft/lb NOTE: Check for proper torque at all locations upon completion of step 4. Especially at locations labeled (1) & (2). Pro-Tech Manufacturing and Distribution, Inc. 711 West Ave ▪ Rochester, New York 14611 888-787-4766...
  • Page 6: Storage And Maintenance

    Figure 6 STORAGE & MAINTENANCE: WARNING: Ensure that cutting edges are adjusted equally Your Pro-Tech Sno Pusher® requires only across the entire width of the Sno Pusher. minimal service to remain in top condition. Follow these simple guidelines to ensure proper Do not over adjust the cutting edges, this plowing and long life.
  • Page 7: Product Registration

    WILL VOID ALL WARRANTIES. pertaining to merchantability and fitness for a particular purpose. 4. Pro-Tech will not be held liable for any personal damage that occurs as a result This warranty is intended to provide you with of use. This includes, but is not limited specific rights;...
  • Page 8 ISL, ISB and ISS Owner’s Guide Pro-Tech Manufacturing and Distribution, Inc. 711 West Ave ▪ Rochester, New York 14611 888-787-4766 www.snopusher.com...

This manual is also suitable for:

Steel edge sno pusher isbSteel edge sno pusher iss