Table of Contents
Advertisement
Q
A
&
A
When frequency is unstable or weak, or if there are too many
users, connection may be cut off even after it was
established. Please try again a little later or try after
relocating to other areas.
Q
When LCD does not turn on.
A
Remove battery and turn on the power after placing it back
on. If there is no change even then, sufficiently charge the
battery and try again.
Q
: When it echoes while connection is made with a certain
telephone in a certain area.
A
Called " Echo Phenomenon " , it occurs if connection volume
is too high or caused by special properties(semi electronic
telephone exchange) of the machine on the other end.
Q
When the phone is heated.
A
If connection is made for a significantly long duration, or
game and Internet and others are used for a long time, the
phone may become hot. This has no effect upon the life of
the product or performance.
Q
When the bell does not ring, or when lamp or LCD blinks
only.
A
May be set as " Vibrate " or " Quiet " in the Profiles menu.
Please select " General " or " Loud "
96
Q
Standby duration for battery gradually becomes shorter.
A
Because battery wear out, its life gradually becomes shorter.
If its life becomes shorter over half of that at the time of
purchase, you must purchase a new one.
Q
When usage time of battery becomes shorter.
A
If time for use of battery is short, it may be due to the user
environment, or large volume of calls, or weak signals.
Q
No number is dialed when you recall a phonebook entry.
A
Check that the number have been stored correctly, by using
the Phone book Search feature. Re-store them, if necessary.
Q
Your correspondent cannot reach you.
A
Is you phone switched on (
seconds)? Are you accessing the right cellular network? Or,
you may have set an incoming call barring option.
Q
I cannot find the lock, PIN, or PUK code. What is my
password?
A
The default lock code is " 0000 " . If you forget or lose the
lock code contact your phone dealer. If you forget or lose a
PIN or PUK code, or if you have not received such a code,
contact your network service provider
Q
A
&
pressed for more than three
97
Advertisement
Table of Contents
