Related Manuals for Babyhug NUBF0014
Summary of Contents for Babyhug NUBF0014
- Page 1 Carrying Capacity up to 35 kg Months + Kelly Baby Cot Happy Dino STYLE CODE : NUBF0014 baby furniture Bassinet + Cot Storage Mosquito Net New Zealand Pine wood...
-
Page 2: Maintenance
User Instruction Manual Make sure that the side rails are closed and locked, when the baby is in the cot This product can be used for a child of upto 6 years of age and a maximum weight of 35 kgs Adjust the bed board height as per the height/devlopmental phase of the child Do not keep the cot close to a re or any re source If the bed board gets wet, please dry it under the fan - do not dry it in the sun... - Page 3 Components Bassinet Protective teething rail Headboard Back guard rail Bedboard Storage Door Caster Wheel Front guard rail Extension board Base Board Storage board Product size : 1140 mm x 682 mm x 872 mm 1620 mm x 682 mm x 872 mm (with open storage board)
-
Page 4: Parts List
Parts List Part Name Used For Extension board Used as the head of the crib and to extend the cot Headboard Used as the head of the cot Back guard rail Connects the headboard with the extension boards Front guard rail Connects the headboard with the extension board, part of which can be rolled over to open and close... - Page 5 Parts List Tool required Screw driver...
- Page 6 Prepare the following parts The side with the hole to x the mosquito net faces the outside Assemble guard rail The protective teething rail is on top, the side with "Babyhug” faces the outside.
- Page 7 Assembly Instructions Prepare the following parts Bed board Base board Assemble the bed board and the board The base board is tted at the Rest the bedboard on the plastic bottom casing Turn the connector outside to the horizontal position connector...
- Page 8 Assembly Instructions For xing the rail in upright position turn the connector downward connector Connector Prepare the following parts Close the extended board Turn the connector downward to the upright position. Connector...
- Page 9 Assembly Instructions Pull back the knobs on both sides of the storage board to fold it Fold storage board Press the cylinder of the caster Prepare the following parts into the plastic receiving cylinder of the crib leg to install the caster wheel Assemble caster wheel...
- Page 10 Assembly Instructions Prepare the following parts Cot assembly nished Assembly Bassinet Prepare the following parts Put bassinet hooks on guard rail Bassinet assembly nished Assemble of the mosquito net...
- Page 11 Assembly Instructions Insert the hook on the mosquito net ring into the mosquito net holder Take down the screws on the Take down the bed board supporter bedboard and change the bedboard position Adjust the position of the bedboard...
- Page 12 Assembly Instructions Take down the base board and put the bedboard in the lowest position Bedboard assembly nished The bed board is adjustable to two positions Put up the bedboard in the lowest position when the baby can crawl Lock the door outside the base board when the bedboard is in the lowest postion The screws should be xed when...