Advertisement
Quick Links
Fitting/replacing bulbs
• This system contains non-replaceable parts and cannot be serviced. If damage occurs the part should
be scrapped.
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could damage the finish.
Recycling advice
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Safety information
For your safety, always switch off the supply before cleaning.
www.saxbylighting.com
Instruction leaflet
Laryn PIR
54408, 54409, 68805, 68806
Iss.4 23022016
Saxby Lighting Ltd. BH23 3PE
Advertisement
Summary of Contents for Saxby Laryn PIR
- Page 1 Instruction leaflet Fitting/replacing bulbs • This system contains non-replaceable parts and cannot be serviced. If damage occurs the part should be scrapped. Laryn PIR 54408, 54409, 68805, 68806 We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish. Recycling advice Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Safety information For your safety, always switch off the supply before cleaning. Iss.4 23022016 www.saxbylighting.com Saxby Lighting Ltd. BH23 3PE...
- Page 2 Installation Thank you for purchasing this light fitting. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please retain these instructions for future reference. • Decide on the optimum location for the product. • Fit the batteries, ensuring the "Battery Care" Ensure the wall is capable of holding the weight of warnings on the previous page are heeded. the product. • Push the button on top of the wall back down with Warning • Place the product in an upright position. one hand and push the product onto the wall back. It will click in place. Refit the screw to the base of the • Remove the screw from the base of the product and product to secure in place. This unit cannot be dimmed. Battery Care:- set aside for refitting later. • Switch on the product using the toggle switch and This product contains non-replaceable parts and - Do not recharge non-rechargeable batteries. • To detach the wall back from the product, press adjust the PIR sensor as detailed below. Please note cannot be serviced. If damage occurs the product down the button (on top of the battery box) with one - Do not mix old and new batteries or batteries of the sensor rotates for easy access to the controls. should be scrapped. hand and pull the ribbon tab with the other hand. different types/brands. Line the white dots up at the front of the product to Waste electrical products should not be disposed of • Using the wall back as a template, mark and drill the - Do not use rechargeable batteries. Always remove...