Add New Device: Device Uid - Vivitar WT-06 User Manual

If the Wi-Fi indicator light is not flashing, then reset your device as follows:
- Take out the batteries and put them back again.
- The light indicator should start flashing, representing that the device is ready to pair.
- Make sure that your mobile device is connected to the Wi-Fi network to which you want to
connect the new device.
- Then, tap the Continue button.

8. ADD NEW DEVICE: DEVICE UID

Please scan the Barcode that is on the device or on the device's hang tag.
NOTE: If a message window appears to allow 'Smart Home Security' to access the device's
camera, please tap on OK to allow access to be able to scan the Barcode.
Alternatively, you can enter the devices UID number as seen by the Barcode, then tap Continue.
11