Product description 1. Connect line 6. Multifunction button 2. Receiver line 7. Ear tip 3. USB charging port 8. Volume - / up 4.MIC 9. Volume + / next 5.Indicator light Page 2...
Specifications and parameters Bluetooth version: Bluetooth Size: about 30CM Main material: ABS Bluetooth effective distance: about 10m Use time: 4 ~ 5 hours Standby time: 250 hours Charging time: about 2 hours Charging current: 80mA Battery capacity: 100mA Page 3...
Basic operation Boot Long press multifunction key 3S to blue light, blue lamp flicker 3 times, then achieve boot function (vibration once), red and blue light alternate flicker, realize automatic enter bluetooth pair pattern To turn it off Long press the multi-function key 3S, shutdown (vibration once), red light flashing 3 times Pairing ①When the power is turned off, the long press is a 3S, the blue...
Page 5
Disconnect In the connection state, the blue light is 10 seconds brighter and the headset is outside the receiver or the bluetooth is turned off, causing the connection to disconnect and enter the reconnect mode Back to the ①When connecting, turn off the headset and reboot (the Iphone is not turned off) to initiate a reconnect ②When the earphone and the phone are at a valid distance, the headphone is disconnected from the phone, and the...
Page 6
Automatic shutdown In the boot state, if there is no device connection, the bluetooth headset will be automatically closed after 5 minutes and the red light will be flashing 3 times Drag and drop function The headset turns on A bluetooth connection and turns off the bluetooth.The headset restarts to connect to the phone B, then opens the connection record of phone A, clicks the connection, realizes the function of one and two, and the blue light flashes in 10...
Page 7
Call The motor vibrates, similar to cell phone calls Answer the phone In the caller state, press MFB button one time to trigger the phone call Hang up the phone When answering the phone, press the MFB button once to trigger the hang up Phone redial Double - click the MFB key to repress the last phone number in any...
Charger and current Before using any of the charger for this earphone, please check the specifications of the charger label is in accordance with the requirements, recommend the charger output voltage is: 5 v, output current is 80 ma, it is very likely charging voltage is too high to damage the bluetooth headset, charging, normally on a red light Precautions and warnings 1.
Page 9
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Page 10
to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Need help?
Do you have a question about the BT-551 and is the answer not in the manual?
Questions and answers