Flexound SC200 User Manual

1 General
2 What's in the box
3 Warnings
4 Overview
5 Power on and off
6 Low battery
6.1 Charging
7 Bluetooth connection
7.1 Pairing
Flexound HUMU (model number: SC200) is a battery-operated player to hear and
feel the music in unison.
You can connect a music source to HUMU with a wireless Bluetooth or wired 3.5 mm
jacket.
Picture.
1 pcs Flexound HUMU SC200 Smart Cushion
1 pcs USB charging cable,
1 pcs User manual,
1 pcs Warranty card
HUMU is only for inside use.
Use enough low sound level to prevent damage of hearing and over stress of head.
Do not leave HUMU alone when its battery is charging.
Pictures.
Main construction of HUMU; Left side, Right side, Top, Bottom, Hand grip, User in-
terface.
User interface of HUMU; Power Button, Power Light, Bluetooth Light, Charging Light,
Micro USB Charger port, Auxiliary Audio Signal Input port
Switch the power on by pressing the Power Button 1...2 s. Whenthe power is set on
the Power Light is on and HUMU give a Power Up mark sound for that.
Switch the power off by pressing the Power Button 1...2 s. When the power is set off
the Power Light bling once in 1 s and HUMU give a Power Down mark sound for that.
Voltage of the battery is low when the Power Light blinging on and off three times
and repeat it in every 3 s and a low voltage beep sound is hearing every 3 minutes.
You can use any standard USB charger to charge the battery of HUMU.
Connect the USB charging cable to the Micro USB Charger port. The battery is full
charged when the Charging Light is turned off.
You can wireless connect HUMU to a Bluetooth connected master device such as a
smart phone, a lap top computer or a tablet computer. See user manual of your de-
vice to use its Bluetooth.
If connecting for the first time, HUMU will enters pairing mode automatically after it
is powered on.
When HUMU is in pairing mode the Power Light and the Bluetooth Light are blinking
on and off repeatedly in 2 s cycle.
USER MANUAL
Preliminary
19.6.2017
1 (3)
User Manual .docx