Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for POSEIDON Salinity Pen Plus+
Summary of Contents for POSEIDON Salinity Pen Plus+
- Page 1 User Guide...
- Page 2 Poseidon Flow Technologies sincerely thanks you for purchasing the Salinity Pen Plus ). The SP is a water resistant, portable, easy to use instrument that uses electri- cal conductivity to determine the Salinity/Specifi c Gravity of natural and/or artifi cial sea water.
- Page 3 Customer Support Many of the steps in this guide have corresponding how-to videos. View them on the Poseidon Flow Technologies web- site at poseidonfl ow.com/support-videos United States and Canada Contact Poseidon Flow Technologies Directly for all warranty service and returns. Visit poseidonfl ow.com/support...
- Page 4 Battery Cap – Unscrew for battery access. Requires 2x CR1632 Button Batteries - Included. Display Panel Displays measurement values Power Button – Depress to power the device on/off . MODE Button – Navigate between operational modes. Temperature (Celsius/Fahrenheit), Salinity(PPT), and Specifi...
- Page 5 Usage Notice To ensure accurate measurement, clean the sensor tip prior to use, and promptly after measurement. Upon completion of testing, rinse the sensor with fresh water, and ensure to fully dry the sensor using a clean, dry cloth or sponge. Always keep the sensor dry when not in use.
-
Page 6: Calibration Procedure
Calibration of the Salinity Pen Plus Calibration of testing equipment is essential for accurate and consistent results, and your new Salinity Pen Plus is no exception. All instruments are tested before they leave the factory however, it is good practice to calibrate your Salinity Pen Plus before use. - Page 7 Proper Salinity Pen Plus Usage Notice Measurement: Keep the sensor at least 0.5” (1cm) away from all edges of the container when measuring. Correct Incorrect...
- Page 8 Rinse the sensor with fresh water prior to measurement. Press the Power Button to turn the device on. a) The unit displays temperature measurement in real time. To toggle between Celsius/Fahrenheit press and hold the MODE button for 3 seconds until the unit change is observed on the display.
- Page 9 Press the CAL/HOLD button to lock the measured value on the display. After measurement rinse the sensor with fresh water, ensure to fully dry the sensor using a clean, dry cloth or sponge. Always keep the sensor dry when not in use. **WARNING!** Air b ubbles stuck to the sensor after it is immersed into the water will lead to...
- Page 10 Platinum Plated Sensor that will be immersed in the aquarium and the main unit body that must not be exposed to water at any time. Poseidon Flow Technologies warranty shall not apply: (i) to any damaged Salinity Pen Plus...
Need help?
Do you have a question about the Salinity Pen Plus+ and is the answer not in the manual?
Questions and answers