1. Manuals
  2. Brands
  3. TECOM Manuals
  4. Headsets
  5. BT3061a
  6. User manual

TECOM BT3061a User Manual

Hide thumbs
1
2

Advertisement

Table of Contents

Bluetooth Headset User Manual (BT3061a)

1. Getting Started

Charge the headset using the adapter. It takes 2 to 2.5 hours to fully recharge the
battery

2. Pairing

Press and hold the ON/OFF button until you hear two short low tones.
The headset indicator light flashes green and red, indicating the pairing mode is
on.
The default ID Code is "1111".

3. Turn the headset on

Press and hold the ON/OFF button until you hear a short tone.
The headset indicator light flashes green, indicating the pairing mode is on. If the
battery is low, the light flashes red.

4. Turn the headset off

Press and hold the button key until you hear a short low tone following a short
high tone.
The headset indicator light is switched off.

5. Adjusting the volume

To increase the volume, press the "+" button
To decrease the volume, press the "-" button

6. Making a call

Enter the number on the mobile keypad.
When the call has been set up, the voice will be transferred to headset.
End the call by pressing the ON/OFF button.

7. Answering calls

When the headset rings, press the ON/OFF button.
End the call by pressing the ON/OFF button.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BT3061a and is the answer not in the manual?

Questions and answers

Summary of Contents for TECOM BT3061a

  • Page 1 Bluetooth Headset User Manual (BT3061a) 1. Getting Started Charge the headset using the adapter. It takes 2 to 2.5 hours to fully recharge the battery 2. Pairing Press and hold the ON/OFF button until you hear two short low tones.
  • Page 2 FCC Caution This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

Table of Contents