Changing The Font Size; Location Settings - Sanyo SCP-5500 Operating Manual

Changing the Changing Changing Changing the the Font Size the Font Size Font Size Font Size
There are four font size settings for the message notification and browser. To change the font
size, follow these steps:
1. Press MENU/OK to access the main menu.
2. Select Setting Settings s s s and press MENU/OK.
Setting Setting
3. Select Display Display Display and press MENU/OK. Display
4. Highlight Font Size Font Size Font Size Font Size and press MENU/OK.
5. Highlight Message Message Message Message or Browser
6. Highlight Small Small or Normal Small Small
7. Select your desired font size.
Press Preview (right softkey) to display a font size example.
●
8. Press MENU/OK to set the selected font.
Tip: From the font example display, you can see the larger/smaller font displays by pressing the Tip
Tip Tip
right or left on the Navigation key.

Location Settings

Location Settings
Location Settings Location Settings
To enable your phone's Location feature:
1. Press MENU/OK to access the main menu.
2. Select Settings Settings and press MENU/OK.
Settings Settings
3. Select Location Location and press MENU/OK.
Location Location
4.Press MENU/OK or OK. Or wait a few seconds until the message scrolls down completely.
5.Select On On and press MENU/OK.
On On
To deactivate this feature, select Off
Tip Tip: These icons lets you know whether information of your position is sent to the network or Tip Tip
not. If you are in no service or roaming area, indication is always
indicates the Location Service is enabled.
indicates the Location Service is disabled.
Browser and press MENU/OK. Browser Browser
Normal, and press MENU/OK. Normal Normal
Off during step 5 above. Off Off
26