1. Manuals
  2. Brands
  3. PENKO Manuals
  4. Accessories
  5. 960
  6. Quick start manual

PENKO 960 Quick Start Manual

The leading experts in weighing & dosing
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PENKO Engineering BV
The Leading Experts In Weighing & Dosing

Quick Start

1. Indication of LEDs
2. Push button functions
3. Power and load cell connection
4. First use of Indicator
5. Digital inputs and outputs
6. RS232 comport
7. Standard Factory Settings
www.penko.com - technical support - literature library
For more information visit
960
Indicator

Advertisement

Table of Contents
loading

Summary of Contents for PENKO 960

  • Page 1: Quick Start

    1. Indication of LEDs 2. Push button functions 3. Power and load cell connection 4. First use of Indicator 5. Digital inputs and outputs 6. RS232 comport 7. Standard Factory Settings For more information visit www.penko.com - technical support - literature library...
  • Page 2 960 Indicator 1. Indications of LEDs 1. Weigher stable 6. Piece counting active 2. Zero active 7. Setpoint 1 (e1) active 3. Net weight active 8. Both setpoint active (e3) 4. Tare active 9. Setpoint 2 (e2) active 5. Code active...

  • Page 3: Push Button Functions

    960 Indicator 2. Push button functions Print/Left Tare/Up Preset Tare/Down Enter, press >2s =>Menu Zero On-Off/Esc 3. Load cell / power connection Make sure the load cell is connected before the power is switched on! Power cable needs to be filtered...

  • Page 4: First Use Of Indicator

    960 Indicator 4. First use of indicator To make the indicator ready for first use set the maximum net weight value, display step size, decimal point position and calibration. The start Turn on the indicator using the ON-OFF button. Set up menu To enter the Set up menu the service code method is used.

  • Page 5: Indicator Settings

    960 Indicator First use of indicator -continue- Indicator Settings Indicator settings are used to set the maximum net weight value (Ind 1), display step size (Ind 5), and decimal point position (Ind 6). First, enter the set up menu by the given code on page 4.
  • Page 6 960 Indicator First use of indicator -continue- Indicator Settings -continue- When the maximum net weight value is set succesfully, the following screen is visible: Display step size Use the UP key to go to Ind 5 and press ENTER Use Ind 5 to set the display step size. The step size defines the scaled parts of the weight value.
  • Page 7 960 Indicator First use of indicator -continue- Indicator Settings -continue- Decimal point To set the Decimal point position, enter Ind 6. The following screen is visible: Press the UP and DOWN keys to define the point position and confirm by ENTER...

  • Page 8: Calibration Settings

    First use of indicator -continue- Calibration Settings Calibration settings are used to check, delete and set calibration points for the 960 indicator. First, enter the set up menu by the given code on page 4 and press the UP key to go to the CAL menu.
  • Page 9 960 Indicator First use of indicator -continue- Calibration Settings -continue- When a number is shown, the deletion of one calibration point is completed and more points need to be deleted. Press ESC >3 sec to do so. > 3 sec When all calibration points are deleted, the following screen is visible: Entering new calibration points.
  • Page 10 960 Indicator First use of indicator -continue- -continue- Calibration Settings The indicator now shows CP2 to calibrate the gain point (CP2). and will automatically jump to Use the UP, DOWN and LEFT keys to enter the reference value. The UP and DOWN keys are used for changing the number (1-9), the LEFT key is used for chan- ging the position of the cursor.

  • Page 11: Digital Inputs And Outputs

    960 Indicator 5. Digital inputs and outputs 15P MALE SUB-D for inputs and outputs Inputs: For remote control, 6 digital inputs are equal to the indicators front keys. Input 1 (pin 4) is the first key 1 sloping height detection: Level switch input.
  • Page 12 960 Indicator 5. Digital inputs and outputs -continue- Outputs: There a 2 digital outputs, for setpoint 1 and 2. They work with Setpoint Menu settings.
  • Page 13 960 Indicator 6. RS232 comport 9P MALE SUB-D RS232 comport...

  • Page 14: Standard Factory Settings

    960 Indicator 7. Standard Factory Settings Description Display Value Your setting Maximum display value Ind1 10009 No motion band Ind2 Zero tracking band Ind3 Digital overall filter Ind4 Display step size Ind5 Decimal point position Ind6 none Display refreshment speed...
  • Page 15 960 Indicator NOTES...
  • Page 16 PENKO Engineering B.V. | Schutterweg 35, 6718 XC Ede | The Netherlands | Tel 0031 (0)318 525630 | Fax 0031 (0)318 529715 | info@penko.com | www.penko.com All product information and specifications are subject to change without prior notice. Copyright © 2013 PENKO. All Rights Reserved.

Table of Contents