ACR Electronics Nauticast 2607 User Manual page 26

Dynamic Keys: Messages
[M5] [Select]
[M8] [Back]
b) Using the NAUTICAST Message Editor
After selecting a vessel, the Message Editor is automatically displayed.
Messages containing a maximum of 156 characters are allowed. Longer texts require a second
message. After text input completion, transmission to the selected addressee is facilitated by
pressing the [Send] button. The [<Back] button leads to the Message Editor for writing a second
message to the same addressee. A second activation of the [<Back] button leads to the Vessel
Listing and allows selection of another addressee.
It is possible to select the desired channel by pressing the [<Channel>] buttons.
The default setting for Addressed Messages is (auto) in contrast to Broadcasted Messages, where
the default setting is set at Channels A+B (AIS1 + AIS2).
o
N 1 20' E
************ Write Message *************
Addressed SRM
SendTo:5004 (DOREEN)
Text:TEXT INPUT IS POSSIBLE HERE
----------------------------------------
Channel:
----------------------------------------
|
Dynamic Keys: Addressed Message Editor
[M5] [Send]
[M6] [Channel]
[M7] [Channel]
[M8] [Back]
User Manual
Write Message to
Selected Vessel
Return to Messages
Menu
o
0 13' |1>0.10|2>1.30|3>1.80nm
auto/ A / B /A+B
[*]/[ ]/[ ]/[ ]
Send |<Channel |Channel> | Back
Send Message
Select Transmission
Channel
Select Transmission
Channel
Return to Vessel
Listing
26
Write Message to
[Enter]
Selected Vessel
129
[Enter] Send Message
Y1-03-0203 Rev.L