3xLogic V250-16 Quick Start Manual

Quick Start Guide

Package Contents
NVR
POWER CABLE
RACK MOUNT EARS
MOUSE
KEYBOARD
TERMINAL BLOCK (FOR ALARMS)
Before You Begin
1. Connect all cameras to PoE Camera Switch with Cat5, Cat5e, or Cat6
networking cable.
2. Connect one of the Corporate LAN Ports to your Site LAN.
3. Connect a monitor to either HDMI and / or VGA.
4. Connect your mouse and keyboard (included) to the rear USB 2.0 (black)
ports.
5. Connect power.
a. The V250-16 will automatically power on and boot into a Wizard which will
guide you through the configuration of your video recorder.
PART NAME
1 Power Shows the Power On/Off Status
2 HDD Blinks to indicate usage of the Hard Drive
3 Link Shows Network Connectivity
4 Tx/Rx Blinks to indicate network usage
5 USB USB 2.0 port
Getting Started | V250-16
1 2 3 4
FUNCTION
5