Page 1
500Wh Power Station User Manual ESS102 Our customer service team is here to help. www.ubiolabs.com support@ubiolabs.com 1-866-642-4428 (Monday-Friday, 9AM-5PM PST)
Page 2
Charge your device now Your new 500Wh power station ships partially charged. To get started please plug it in with the included AC adaptor. Fully charging from empty should take around 6-7 hours. We recommend fully charging the device before use. Not Waterproof The Power Station is not designed to be used in wet conditions or exposed to water.
Table of Contents Getting to know the Power Station Front Panel................04 Rear Panel................05 Charging Adaptor...............05 Smart LCD Screen..............06 Error Messages..............07 Audible Warnings...............08 Using The Power Station What Does it Power............09 The AC Outputs..............10 12V Barrel Ports..............11 USB and Type-C Ports............12 Using the Utility Lights..............13 Charging the Power Station............14 Best Practices...
Getting to Know the Power Station Front Panel 1. Main Power Button Press and Hold to turn on. 2. Smart LCD Screen 3. Screen Button Turns the LCD screen on and off. Turning the screen off will not power down the device. 4.
Getting to Know the Power Station Rear Panel 1. DC Input Used to charge your device with included wall adaptor. 2. Fan Vents Ensure proper airflow during use. Charging Adaptor 1. 80W AC charging adaptor The included adaptor has been designed to work specifically with the power station.
Getting to Know the Power Station Smart Screen LCD Normal Operation 1. Battery Temperature Displays the temperature of the internal battery pack. Normal operating range is 0° to 140° F. 2. Remaining Battery Capacity Displays the remaining battery capacity. 3. Time to charge or time to discharge Real-time calculation of total time to fully charge or discharge when in use.
Getting to Know the Power Station Error Messages 1. High battery temperature Displays when internal battery pack reaches temperature over 113° F when charging, and 140° when discharging. It is recommended that you unplug devices, power off, and allow to cool for 30-60 minutes.
Getting to Know the Power Station Error Messages 5. Mute Displays when a user has pressed the display button to mute the audible warning that occurs when an error message is on screen. 6. Low battery warning Flashes when the internal battery pack reached 10% capacity remaining.
Using the Power Station What Does It Power? While there are more devices than we can list here, your new power station is well suited to powering these types of devices: Mobile Tablets Laptops Mini Fridge Small LCD Phones Home Lamp CPAP Drone Camera...
Using the Power Station The AC Outputs The two AC outputs power devices that use a standard wall plug and operate at 110V. The combined output for both AC outputs is 300W. Simply power-on the AC section and plug in a device like you would into a wall socket.
Using the Power Station 12V Barrel Port The 12V barrel port adaptor can be used to power or charge many devices. With a 10A/120W max output current, devices such as mobile phones, tablets, bluetooth speakers, and other USB powered devices can be charged or operated with the appropriate adaptor cable.
Using the Power Station USB and Type-C Ports The USB and Type-C ports are designed for use with mobile phones, tablets, Bluetooth speakers, and other USB-powered devices. Each port outputs 5V which means almost any device that uses a USB, micro USB, or Type-C input can be charged. 2.4A ports Universal USB ports for charging phones, tablets, Bluetooth Speakers, headphones, and other USB-powered devices.
Using the Utility Lights The Power Station comes equipped with two LED uility lights on the front left and right side of the unit. Each of the utility lights has it’s own power/brightness button. To operate the utility lights, press the button once to turn the light on.
Charging the Power Station Using the Included AC Adaptor The included power adaptor has been designed to work specifically with the Power Station DO NOT USE 3rd PARTY ADAPTORS TO CHARGE YOUR POWER STATION When plugged-in, the battery icon on the screen will flash and the “time to charge”...
Best Practices Storage and Maintenance The Power Station can be left plugged in to a wall outlet during storage. This will ensure your Power Station is always changed and ready for use. If storing the Power Station unplugged, we recommend fully charging every 3 months which will prolong the battery life and ensure it’s ready for use.
Frequently Asked Questions What type of battery is in my Power Station? Your Power Station uses a 10.8V/45ah lithium ion battery pack comprised of 54 individual lithium ion cells. Each cell provides 2550mAh resulting in a total battery capacity of 500Wh (137,700mAh).
Page 17
Why is my device making a buzzing sound? The Power Station features an audible alarm to alert the user to active error message on the screen. When you hear this, refer to the screen to see what the error message is and resolve the issue.
Technical Specifications Item Specification Power Charging Time 6 - 7Hrs Output Voltage 110V AC±3% Output Frequency 50/60Hz±0.5Hz Output Power 300W (Pure Sine Wave) Peak Output Power Output 600W Over Load 100% <Load> 116% @ 5 min; 116%<Load>150% @ 2mins; 150%<Load>200% @ 2secs Static consumption <5W (No Load)
Page 19
Technical Specifications Cycle Life 500times @80% Output Voltage 12.6± 0.5V 12V Barrel Port Output Current Output Overload Current >11A Output Voltage 5 ± 0.3V Output Current 5V USB 2.4A Overload Current >3.2A 3.6-12V Output Voltage Quick Charge Output Current 3A Max. USB Ports Load 18W max.
Page 20
Technical Specifications Ambient Humidity 10%-90% Cooling Method General Warranty 1 Year Dimension 9.2” L × 6.5” W × 8.2” H N.W. 14.9 Lbs.
Troubleshooting My Device is not receiving power from the AC inverters or 12V supply 1. Ensure that the AC output or 12V section is activated. The LED next to the activation button should be illuminated. Press the power button if the LED is not illuminated. 2.
If for any reason you are unhappy with your purchase, or require assistance, please contact us so we can make it right. DO NOT RETURN TO THE STORE Our customer service team is here to help. www.ubiolabs.com support@ubiolabs.com 1-866-642-4428 (Monday-Friday, 9am-5pm PST)
Warranty At Ubio Labs we are dedicated to designing and manufacturing products with superior performance and 100% customer satisfaction. All of our products come with a 1 year limited warranty from date of purchase. Thanks for getting charged up with Ubio!