Summary of Contents for Slinky Anatomics T-Rex
-
Page 1: Assembly Instructions
Assembly Instructions ©2009 Poof®-Slinky®, Inc. P.O. Box 701394 Plymouth, MI 48170-0964 www.poof-slinky.com... - Page 2 Assembly Instructions Your Anatomics T-Rex comes complete with all the parts necessary for you to create a complete dinosaur. This includes the skeletal structure, organs and even a layer of skin. You can display this magnificent creature complete or assemble the creature using only the organs and skeleton. Ei- ther way you will be able to see how a dinosaur looks from the inside out.
- Page 3 Next, attach the brain to the upper mouth. Press the tongue onto the lower mouth. Attach the upper mouth and brain to the right side of skull and the tongue and lower mouth to the right jawbone. See Fig. 2. Fig.
- Page 4 Fig. 3 After setting the neck joint into the skull, complete the skull assembly by fitting the other side of the skull and jaw onto the side with the mouth and tongue. Once completed the skull assembly will fit together tightly, while the neck and upper spine should fit more loosely.
- Page 5 STEP 3 - Assemble the organs Fig. 5 Set the organs together as shown. The organs attach to the spinal column in two groupings. The Liver and the Kidney attach directly. The Windpipe, Lung, Heart and Entrails attach as a unit. Fig.
- Page 6 STEP 4 - Attach spinal column to the Neck as shown in Fig. 7 Fig. 7 STEP 5 - Attach the Rib Cage The rib cage comes in two halves. Place the spinal column with the organs into the rib cage. To line up the rib cage for proper assembly, along the top of the rib cage there are 3 notches.
- Page 7 Fig. 8 STEP 6 - Attach front and rear femur Right front and left front femur attach to the top of the rib cage and con- nect together as shown in Fig. 9. Fig. 9...
- Page 8 Right rear and left rear femurs attach to spine as well as each other as shown on Fig. 9. SKIN OR SKELETON? For skin proceed to step 7; For skeleton go to step 11. STEP 7 - apply the skin to the skeleton as shown in Fig. 10. Snap the two halves of the tail section over the skeleton tail.
- Page 9 STEP 8 - Assemble Rear Legs Snap halves of rear leg bones together. Place bones inside of leg skin. Snap two halves of leg skin together as shown in Fig. 11. Fig. 11 Attach foot as shown in Fig. 11. STEP 9 - Attach rear legs to the body.
- Page 10 Fig. 12 STEP 11 - Set the T-Rex into the base. Because of the weight of the T-Rex, there is a support post. Insert the post under the tail and into the hole in the base. Also, there are two additional holes in the base to receive the posts that are under each foot.
- Page 11 Fig. 13 STEP 12 - Optional Skeleton View Assemble rear legs. Snap halves of rear leg bones together. Attach rear legs to rear femur. Attach skeleton feet to the bottom of legs. STEP 13 - Attach upper arm bones to front femur. Attach skeleton claws to arms.
Need help?
Do you have a question about the Anatomics T-Rex and is the answer not in the manual?
Questions and answers