1. Manuals
  2. Brands
  3. Crafco Manuals
  4. Industrial Equipment
  5. SUPER SHOT 60
  6. Parts manual

Crafco SUPER SHOT 60 Parts Manual

Propane melter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SUPER SHOT 60 PROPANE MELTER
Parts Manual - 26616
Revision C

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SUPER SHOT 60 and is the answer not in the manual?

Questions and answers

George scutt
March 14, 2025

Hi crafco ss60 light on panel is Lit for the hose to heat but temperature not going up?

0
1 comments:
Mr. Anderson
March 14, 2025

The temperature on the Crafco Super Shot 60 may not be increasing despite the hose heating light being on due to heating wires electrically shorting to the metal braid in the hose. This causes the hose to stop heating. Additionally, improper settings or failure to allow sufficient heating time (minimum 30 minutes) could also be a factor. Ensure the hose temperature is set to 380°F or the manufacturer-recommended operating temperature.

This answer is automatically generated

0

Subscribe to Our Youtube Channel

Summary of Contents for Crafco SUPER SHOT 60

  • Page 1 SUPER SHOT 60 PROPANE MELTER Parts Manual - 26616 Revision C...
  • Page 2 Fill in appropriate fields that apply to this machine Machine S/N: _ _______________________________ Hose S/N: _______________________________ Hose S/N: _______________________________ Pump S/N: _______________________________ Pump S/N: ______________________________ Engine S/N: ________________________________ Compressor S/N: _____________________________ Gear Box S/N (Patcher): ______________________ Blower S/N (Magnum): ________________________...
  • Page 3 Super Shot 60 Propane Melter Part Manual Revisions Revision Description Date New Format; updated warranty, added EAC and CE logo, 9/18/18 Copyright date; 2 year warranty, wand handle P/Ns...
  • Page 4 Super Shot 60 Propane Trailer Melter PN 43300 Super Shot 60 Propane Skid Melter PN 50750...

  • Page 5: Table Of Contents

    Super Shot 60 Propane Melter Part Manual Table of Contents 1.0 About This Manual ........................1-1 1.1 How to use this manual: ...................... 1-1 2.0 Safety Precautions ........................2-1 2.1 General Safety........................2-1 2.2 Personal Safety ........................2-1 2.3 Equipment or Operational Safety ..................2-2 2.4 Safety Symbols and Notices ....................
  • Page 6 Super Shot 60 Propane Melter Part Manual Table of Contents 6.8 Brakes ..........................6-2 6.9 Tongue Jack ........................6-2 6.10 Temperature control Calibration ..................6-3 6.11 Cleaning the Melter ......................6-3 6.12 Maintenance Chart ......................6-4 6.13 Service Instructions ......................6-5 6.14 General Maintenance Parts ....................
  • Page 7 9.0 About the Illustrated Parts List....................9-1 9.1 Ordering Crafco Parts ......................9-1 9.2 Super Shot 60 Propane Trailer Melter Assembly 43300 ............9-2 9.3 Super Shot 60 Propane Skid Melter Assembly 50750............9-6 9.4 Tank Assembly, SS60 Propane ..................9-10 9.5 Control Box Assembly: PN 44075 ..................
  • Page 8 Super Shot 60 Propane Melter Part Manual List of Figures Fig. 5-1 Hydraulic Fluid Level and Temp. Gauge ................5-2 Fig. 5-2 Heat Transfer Oil Dip Stick....................5-2 Fig. 6-1 Lug bolt Tightening Sequence ..................6-2 Fig. 6-2 Temperature Control Calibration ..................6-3 Fig.
  • Page 9 List of Figures Fig. 8-9 Pump Circuit Schematic ....................8-35 Fig. 9-1 Super Shot 60 Propane Trailer Melter: PN 43300 ............9-2 Fig. 9-2 Super Shot 60 Propane Skid Melter: PN 50750 ............... 9-6 Fig. 9-3 Tank Assembly: SS60 Propane..................9-10 Fig.
  • Page 10 Super Shot 60 Propane Melter Part Manual List of Tables Table 2-1 Safety Symbols and Notices ..................2-3 Table 2-2 Safety Symbols and Notices (continued) ............... 2-4 Table 4-1 Machine Specifications ....................4-1 Table 5-1 Preparing the Machine for Start Up ................5-1 Table 5-2 Starting the Burner ......................
  • Page 11 Super Shot 60 Propane Melter Part Manual List of Tables Table 6-16 Material Pump Replacement (continued) ..............6-17 Table 6-17 Material Pump Replacement (continued) ..............6-18 Table 6-18 Material Pump Replacement (continued) ..............6-19 Table 8-1 Basic Visual Troubleshooting ..................8-1 Table 8-2 Basic Visual Troubleshooting (continued) ..............
  • Page 12 Table 8-29 Pump Hydraulic Troubleshooting ................8-34 Table 9-1 Super Shot 60 Propane Trailer Melter: PN 43300 ............9-3 Table 9-2 Super Shot 60 Propane Trailer Melter: PN 43300 (continued) ........9-4 Table 9-3 Super Shot 60 Propane Trailer Melter: PN 43300 (continued) ........9-5 Table 9-4 Super Shot 60 Propane Skid Melter: PN 50750 ............

  • Page 13: About This Manual

    Chapter 1 Introduction 1.0 About This Manual This manual is supplied with each new Crafco Super Shot 60 Propane Melter. The manual assists your machine operators in the proper use of the melter applicator and provides information about the machine’s mechanical functions Your Crafco Super Shot 60 Propane Melter is specially made to give excellent service and save maintenance expense.

  • Page 15: Safety Precautions

    Or contact your nearest authorized Crafco Distributor at crafco.com/Distributors. 2.1 General Safety  Crafco, Inc. assumes no liability for an accident or injury incurred through improper use of the machine.  Read this manual thoroughly before operating the machine.

  • Page 16: Equipment Or Operational Safety

    Super Shot 60 Propane Melter Part Manual Chapter 2 Safety 2.3 Equipment or Operational Safety  Do not operate the machine in buildings or work areas that do not have sufficient airflow.  Shut-down the burner and the engine before refilling the fuel tank.

  • Page 17: Safety Symbols And Notices

    Super Shot 60 Propane Melter Part Manual Chapter 2 Safety 2.4 Safety Symbols and Notices Important safety symbols and notices are marked on the machine and in this manual. Failure to comply could result in equipment damage, operational malfunction, serious injury, or death. Please read and comply with all symbols and notices.

  • Page 18: Table 2-2 Safety Symbols And Notices (Continued)

    Super Shot 60 Propane Melter Part Manual Chapter 2 Safety Table 2-2 Safety Symbols and Notices (continued) Symbol Item Remark Crush Hazard Keep feet and legs clear. Pinch Hazard Keep hands and feet clear. Exhaust Hazard Avoid breathing engine exhaust.

  • Page 19: Limited Warranty

    CAUTION Use of replacement parts other than genuine Crafco parts may impair the safety or reliability of your equipment and nullifies any warranty. ©2018 by Crafco, Inc. All Rights Reserved………………………………………………………….…Warranty Information 3-1...

  • Page 20: Warranty Claim Instructions

    RA number. The customer will be emailed or faxed an RA form with all instructions to return the item to Crafco, Inc. See example. If the part is found to be within the two year warranty period and has not been abused or modified, a credit will be issued to the customer’s account or credit card.

  • Page 21: Machine Specifications

    (2) ST185/80 D13-4 ply rating (1,725 lbs. (782 kg) each) Dry Weight Approximately 2,200 lbs. (997 kg) Propane Bottle (1) 100 lbs. (45 kg) Hydraulic Tank Capacity 26 Gallons (98 liters) ©2018 by Crafco, Inc. All Rights Reserved……………………………………………………………Machine Specifications 4-1...

  • Page 23: Operating Instructions

    Super Shot 60 Propane Melter Part Manual Chapter 5 Operating Instructions 5.0 Operating Instructions The Crafco Super Shot 60 Propane Melter was developed to melt Crafco sealants. However, it works well with most road asphalt and federal specification crack or joint sealants. Note: DO NOT attempt to operate the machine without using these and all other instructions.

  • Page 24: Fig. 5-1 Hydraulic Fluid Level And Temp. Gauge

    Fig. 5-1 Hydraulic Fluid Level and Temp. Gauge Dipstick for Heat Transfer Oil Level at 150°F Level at 70°F Level at 0°F Bottom of Dipstick Fig. 5-2 Heat Transfer Oil Dip Stick ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………..….Operating Instructions 5-2...

  • Page 25: Machine Start Up

    The hose automatically turns “ON” when the material temperature reaches 275°F. Adjust the hose temperature dial to the manufacturer’s recommended temperature. Note: The hose reaches operating temperature in approximately 30 minutes. ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………..….Operating Instructions 5-3...

  • Page 26: Table 5-3 Starting The Burner For Electric Hose (Continued)

    DO NOT remove the hose from the boom during operation or kinking will occur. Important: It is strongly recommended that the hose be stored in the boom (locked position) when not in use or when in transit. This will prevent twisting or kinking. ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………..….Operating Instructions 5-4...

  • Page 27: About The Heated Hose, Wand, Valve, And Tip Guard

    INSTALL 26084 MINI GEAR CLAMP ONTO THE DUCKBILL VALVE 50270 26083 CLAMP NEEDS TO BE ROTATED TO THE SIDE AS SHOWN. THIS KEEPS IT FROM CATCHING ON SHOEBOX. DETAIL A 50278 ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………..….Operating Instructions 5-5...

  • Page 28: Operating The Electric Hose

    Do not twist or bend hose over sharp edges such as the edge of the frame or tank. Crafco, Inc. recommends you do not work directly under the boom; this may cause damage to the hose. Follow all machine instructions in this manual.

  • Page 29: Dispensing The Material

    360 degrees around the pump whatever the sealant agitator is engaged. The active screen protects the pump from foreign object damage and self-cleans as it rotates around the sealant pump and suction port. ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………..….Operating Instructions 5-7...

  • Page 30: Loading Material Into The Sealant Tank

    When sealant placement volume is low, or the crew has stopped working for lunch hot oil and material temperatures can equalize. To lower material temperature add a few blocks of cold sealant. This may not be an option if the tank is full. ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………..….Operating Instructions 5-8...

  • Page 31: Material Tank Depth Chart

    83.28 39.78 150.58 18.94 71.70 42.84 162.17 15.88 60.11 45.90 173.75 12.82 48.53 48.96 185.33 9.76 36.95 52.02 196.92 25.36 55.08 208.50 3.64 13.78 58.14 220.08 0.58 2.20 58.72 19.19 222.28 ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………..….Operating Instructions 5-9...

  • Page 32: Shutting Down And Cleaning Out The Machine

    Action CAUTION When shutting down the machine for the day, Crafco recommends leaving the melter about half full with material. This will give a fairly rapid heat up rate in the morning, but allows enough material to start dispensing right away when the material becomes molten.

  • Page 33: Storing The Electric Hose For Transport

    The swivel is cold and is not flexible which can cause the hose to twist. The wiring between the hose and the wand is pulled, stressed, or used to support the wand. ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………..….Operating Instructions 5-11...

  • Page 34: Overnight Heater Use

    Disconnect the heater when using the machine’s burner system. CAUTION Do not use the heater without heat transfer oil in the tank. Doing so will overheat and damage the heater, and it will have to be replaced. ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………..….Operating Instructions 5-12...

  • Page 35: Mounting A Skid Machine

    Leave 15” clearance around the machine. Keep this area clear of any flammable material such as empty sealant boxes. Failure to keep this area clear could result in damage and possible fire! ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………..….Operating Instructions 5-13...

  • Page 36: Shot Timer Option

    Once the material is flowing properly release the wand trigger and change the toggle switch labeled “MODE” to “Marker”. ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………..….Operating Instructions 5-14...

  • Page 37: Shot Timer Troubleshooting Manual

    Action Inside this shot timer box is a knob that controls how long the pump stays running each time you pull the trigger (1/4 to 5 seconds). Crafco recommends setting the dial between ¼ and ½ for the shot size.

  • Page 38: Storing The Machine

    Failure to follow this procedure will cause the material to overflow the tank resulting in possible machine damage and/or personal injury. Store the machine for longer periods with the material tank empty. ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………..….Operating Instructions 5-16...

  • Page 39: Maintenance Instructions

    Once the walls and sensor guard areas are cleaned, remove all the loose chunks from the tank, and vacuum out any smaller pieces. ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-1...

  • Page 40: Fig. 6-1 Lug Bolt Tightening Sequence

    Fig. 6-1 Lug bolt Tightening Sequence. 4-BOLT 5-BOLT 6-BOLT Fig. 6-1 Lug bolt Tightening Sequence 6.8 Brakes Check the brakes daily. 6.9 Tongue Jack Lubricate the tongue jack, using a good grade of bearing grease. ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-2...

  • Page 41: Fig. 6-2 Temperature Control Calibration

    Calibration Mark Fig. 6-2 Temperature Control Calibration 6.11 Cleaning the Melter We recommend using Orange-Sol industrial cleaner for cleaning the exterior of the machine. Here is the website for the cleaner; https://www.orange-sol.com/industrial-formula/. ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-3...

  • Page 42: Heat Transfer Oil

    Once a year or as needed the material tank Scrape out built up material Material Sensor Guard around guard For a list of parts required for maintenance see Table 6-3 General Maintenance Parts. ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-4...

  • Page 43: Service Instructions

    Refer to the material manufacturer’s instructions for recommendations. Note: Follow the recommended maintenance per Table 6-1 Maintenance Chart For service, find a list of authorized Distributors and service centers at Crafco.com/Distributors. 6.14 General Maintenance Parts Table 6-3 General Maintenance Parts Quantity Description Part No.

  • Page 44: Recommended Spare Parts

    Propane Vapor Draw System 100 Lbs. (45 kg) Hydraulic Oil Shell AW Hydraulic 46 24 Gal (90 l) Heat Transfer Oil Shell Turbo T 68 (Group II) 23 Gal. (87 l) ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-6...

  • Page 45: Applicable Brands Of Heat Transfer Oil

    Shell Turbo T 68 (Group II) CAUTION The heat transfer oil in this machine is a grade that has been tested and recommended by Crafco, Inc. Using a grade of oil not specifically recommended by Crafco, Inc., is cause for warranties to be voided.

  • Page 46: Material Pump Replacement

    Remove both guards from the motor mount to access the chain and the sprockets. Rotate both the agitator and pump shafts until the connecting link and set screws are accessible. (See Fig. 6-3 Material Pump Replacement) Fig. 6-3 Material Pump Replacement ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-8...

  • Page 47: Fig. 6-4 Removal Of Motor Mount Assembly

    Remove the pump drive shaft from the center of the agitator shaft. Remove the two (2) bolts holding the agitator shaft bearing. Note: Do not remove the bearing from the agitator shaft. Fig. 6-4 Removal of Motor Mount Assembly ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-9...

  • Page 48: Fig. 6-5 Supporting The Agitator Away From The Material Pump

    Lift the agitator shaft and screen assembly as high as possible and insert a screw driver into the shaft hole. Note: This will support the assembly while removing the pump from the tank. Fig. 6-5 Supporting the Agitator Away from the Material Pump ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-10...

  • Page 49: Fig. 6-6 Unbolting The Material Pump

    Crush Hazard. The pump weighs approximately 90 pounds (40.8 kg). Take precautions not to drop the pump on any part of your body or pinch any part of your body between the pump and another object. Fig. 6-6 Unbolting the Material Pump ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-11...

  • Page 50: Fig. 6-7 Cleaning Of The Pump Mounting Plate

    Fig. 6-7 Cleaning of the Pump Mounting Plate) CAUTION Premature pump wear results if the pump mounting plate and bolt holes are not properly cleaned. Fig. 6-7 Cleaning of the Pump Mounting Plate ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-12...

  • Page 51: Fig. 6-8 Pump Drive Shaft Dry Fit To Material Pump

    Make sure that the pump shaft coupling fits correctly onto the new material pump before mounting the material pump inside the tank. Also make sure the pump spins freely. Fig. 6-8 Pump Drive Shaft Dry Fit to Material Pump ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-13...

  • Page 52: Fig. 6-9 New Material Pump Mounting

    (6) 3/8”-16 x 5” bolt with (6) 3/8” lock washer. Torque these six bolts at 33 lb-ft. Note: Make sure the material pump shaft spins freely after torqueing these bolts. Fig. 6-9 New Material Pump Mounting ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-14...

  • Page 53: Fig. 6-10 Agitator Shaft And Paddles Mounting

    Table 6-14 Material Pump Replacement (continued) Step Action Crafco, Inc. recommends that you use a new screen assembly to insure the agitator and paddles have good threads to secure with, along with new hardware. (See Fig. 6-10 Agitator Shaft and Paddles...

  • Page 54: Fig. 6-11 Pump Shaft Placement

    Note: Make sure the when the pump shaft spins the material pump spins as well. Fig. 6-11 Pump Shaft Placement ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-16...

  • Page 55: Fig. 6-12 Pump Shaft To Hydraulic Pump Motor Placement

    (4) 5/16”-18 x 1” bolt and (4) 5/16” lock washer. Slide the pump shaft onto the hydraulic motor shaft and tighten the set screws. Fig. 6-12 Pump Shaft to Hydraulic Pump Motor Placement ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-17...

  • Page 56: Fig. 6-13 Agitator Connecting Link

    Insert the master link from below up through the chain assembly first row, then add two spacers, then push the master lick through the second row of the double chain, then add the last spacer and the locking clip. Fig. 6-13 Agitator Connecting Link ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-18...

  • Page 57: Fig. 6-14 Agitator Chain Tightening Steps

    (4) bolts that hold the agitator hydraulic motor in place. Place both chain guards back into place and replace all four of the hydraulic hoses. Fig. 6-14 Agitator Chain Tightening Steps ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-19...

  • Page 58: Wand Repair Instructions

    3. Replace terminal block and install (2) #10-32 x 5/8” screws and tighten. 4. Follow steps 10-12 from 6.20.1 above. If actuator, pin, and spring need to be reinstalled see Fig. 6-18 Actuator Spring Location Fig. 6-19 Actuator / Assembly. ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-20...

  • Page 59: Wand Handle Replacement

    5. Flip wand over and remove the remaining (2) 1/4-20 x 1/2” screws from the handle. Remove handle from wand tube. 6. Install new handle by reversing previous steps. Fig. 6-15 Switch Wire Location Fig. 6-16 Wire Routing ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-21...

  • Page 60: Fig. 6-17 Terminal Block Wiring

    Super Shot 60 Propane Melter Part Manual Chapter 6 Maintenance Instructions Fig. 6-17 Terminal Block Wiring Fig. 6-18 Actuator Spring Location ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-22...

  • Page 61: Fig. 6-19 Actuator / Assembly

    Super Shot 60 Propane Melter Part Manual Chapter 6 Maintenance Instructions Pin location Spring location Switch lever location Fig. 6-19 Actuator / Assembly ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………...…Maintenance Instructions 6-23...

  • Page 63: How To Use A Multimeter

    Touch one probe to each screw or wire of the sensor. The meter will read X.XX if in the 2K range or XXX.X if in the 2000 range. ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………..….…How to Use a Multimeter 7-1...

  • Page 64: Checking Amperage

    DC Voltage • Everything except Generator Use these ports. Do not AC Voltage ~ use the fuse port, it is for • Generator Output amps Fig. 7-1 Standard Multimeter ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………..….…How to Use a Multimeter 7-2...

  • Page 65: Fig. 7-2 Clamp - On Amp Meter/Multimeter

    • Hyd. Coils AC Amps ~ • Burner Ignition Coil • Hose Current Audible Continuity  Hose, Wand, and wire connection Fig. 7-2 Clamp – On Amp Meter/Multimeter ©2018 by Crafco, Inc. All Rights Reserved………………..…………………………………..….…How to Use a Multimeter 7-3...

  • Page 67: Burner Troubleshooting

     Yes, go to Step 9. Is the valve on the propane tank open?  No, open valve to allow propane to flow to the ball valve on the hose. ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-1...

  • Page 68: Table 8-2 Basic Visual Troubleshooting (Continued)

    Yes, go to Table 8-11 Sealant is Heating Slowly seems like it takes a lot longer to reach operating temperature?  .No, Call Crafco, Inc. and speak to a customer service technician. ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-2...

  • Page 69: Table 8-3 Burner Electrical Troubleshooting

     No, check for loose or broken ORN-2 wire ground BLK-5 wire on the Hot Oil Pacstat between the power toggle switch and the terminal #4? Hot Oil Pacstat terminal #3 along with the BLK-5 ground wire. ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-3...

  • Page 70: Table 8-4 Burner Electrical Trouble Shooting (Continued)

     No, check the length of the GRY-4 wire for the top inside the control box and a nearby possible damage. ground? ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-4...

  • Page 71: Table 8-5 Burner Electrical Trouble Shooting (Continued)

     No, make sure the “DP BRN” wire is from the bottom inside the control box and a completely inserted into the terminal block. nearby ground? ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-5...

  • Page 72: Table 8-6 Burner Electrical Trouble Shooting (Continued)

    Is there 12Vdc between both terminals on the  No, Call Crafco, Inc. and speak to a din plug located on the gas valve? customer service technician. Fig. 8-2 Checking Din Plug Voltage ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-6...

  • Page 73: Fig. 8-1 Propane Burner Schematic

    Super Shot 60 Propane Melter Part Manual Chapter 8 Troubleshooting BLK-4 ORN-1 ORN-1 ORN-1 GRY-4 Fig. 8-1 Propane Burner Schematic ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-7...

  • Page 74: Burner Ignitor Proper Spacing And Function

    Check both electrical connectors for the spark and sensor; these both need to be clean from any corrosion and a tight fit to the ignitor spades. ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-8...

  • Page 75: Checking Spark Control Module

    Support the burner from underneath the unit and unbolt the four bolts holding the burner in place. ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-9...

  • Page 76: Sealant Is Heating Slowly

    500 hours, or one year, you need to change your oil. Many of Crafco, Inc. service centers can perform these service steps for you if you cannot. Call your local service center to find out if they can.

  • Page 77: Mixer Troubleshooting

    Is the hydraulic fluid level near the center of Troubleshooting the sight gauge? Check at ambient  No, fill oil to the center of the sight gauge. temperature. See Fig. 5-1 Hydraulic Fluid Level and Temp. Gauge ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-11...

  • Page 78: Table 8-13 Mixer Electrical Troubleshooting

    Readjust the lid switch so that the lid completely depresses the switch, and then recheck for 12Vdc. If the same result happens, replace the lid switch.  No, go to step 4. ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-12...

  • Page 79: Table 8-14 Mixer Electrical Troubleshooting (Continued)

    Is there 12Vdc between orange wire labeled ORN-2 terminal #3 and terminal #5 black wires between terminal #3 and terminal ground of hot oil PAKSTAT? block.  No, go to step 7. ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-13...

  • Page 80: Table 8-15 Mixer Electrical Troubleshooting (Continued)

     Yes, there should be 12Vdc at all previous Check connections and condition of red steps. battery cable and RED-PWR on the positive  No, replace battery cable. post on the battery? ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-14...

  • Page 81: Fig. 8-2 Checking Din Plug Voltage

    Super Shot 60 Propane Melter Part Manual Chapter 8 Troubleshooting Fig. 8-2 Checking Din Plug Voltage ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-15...

  • Page 82: Fig. 8-3 Mixer Schematic

    Super Shot 60 Propane Melter Part Manual Chapter 8 Troubleshooting Fig. 8-3 Mixer Schematic ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-16...

  • Page 83: Table 8-16 Mixer Hydraulic Troubleshooting

    (Refer to Fig. 8-4 Hydraulic  No, replace the hydraulic pump. Valve Pressure Setting for flow rate). ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-17...

  • Page 84: Fig. 8-4 Hydraulic Valve Pressure Setting

    Hydraulic Flow Compressor = Front section 16.61 GPM @ 2800 RPM Hydraulic Flow Compressor = Rear section 7.03 GPM @ 2800 RPM Compressor Relief = 2500 PSI Fig. 8-4 Hydraulic Valve Pressure Setting ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-18...

  • Page 85: Fig. 8-5 Din Plug Layout

    Chapter 8 Troubleshooting DIN PLUG #4 DIN PLUG #3 MIXER FORWARD MIXER REVERSE DIN PLUG #1 DIN PLUG #2 MATERIAL PUMP MATERIAL PUMP REVERSE FORWARD MOUNTING BRACKET Fig. 8-5 Din Plug Layout ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-19...

  • Page 86: Hose Troubleshooting

     No, go to Step 3. 20-22 Amps hot. NOTE: Always use a clamp-on amp meter to perform this test. Each wire should have the same amp reading (+/- 1 amp). ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-20...

  • Page 87: Table 8-19 Hose Electrical Troubleshooting (Continued)

    Is there 12Vdc between pink wire labeled “PNK-3 and nearby ground source (black customer service technician you should have wire)? been able to find the problem.  No, replace terminal block. ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-21...

  • Page 88: Fig. 8-6 Junction Box Voltage Testing

    Chapter 8 Troubleshooting Test #2 between black and green wires Test #1 between black and white wires Test #3 between white and green wires Fig. 8-6 Junction Box Voltage Testing ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-22...

  • Page 89: Fig. 8-7 Hose Circuit Schematic

    Super Shot 60 Propane Melter Part Manual Chapter 8 Troubleshooting Fig. 8-7 Hose Circuit Schematic ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-23...

  • Page 90: Fig. 8-8 Junction Box Wiring

    SENSOR WHITE HEATER BLUE HEATER BLUE HEATER BLUE TRIGGER RED TRIGGER GREEN SENSOR BLACK SENSOR WHITE HEATER GREEN HEATER WHITE HEATER BLACK KETTLE END WAND END Fig. 8-8 Junction Box Wiring ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-24...

  • Page 91: Symtom: Trigger Is Not Working

    C and B wand side. back the hose for repair.  No, this wand needs to be repaired or replaced. Contact Crafco, Inc. to send back the hose for repair. ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-25...

  • Page 92: Rtd Sensor Ohms Vs. Temperature

    1443.8 1445.9 1448.0 1450.1 1452.2 1454.3 1456.4 1458.5 1460.6 1462.7 1464.8 1466.9 1469.0 1471.1 1473.2 1475.3 1477.3 1479.4 1481.5 1483.6 1485.7 1487.8 1489.9 1492.0 1494.1 1496.1 1498.2 1500.3 1502.4 1504.5 ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-26...

  • Page 93: Table 8-22 Rtd Sensor Ohms Vs. Temperature (Continued)

    2036.8 2038.8 2040.8 2042.8 2044.7 2046.7 2048.7 2050.7 2052.7 2054.7 2056.7 2058.7 2060.7 2062.7 2064.6 2066.6 2068.6 2070.6 2072.6 2074.6 2076.6 2078.5 2080.5 2082.5 2084.5 2086.5 2088.5 2090.4 2092.4 2094.4 ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-27...

  • Page 94: Pump Troubleshooting

    • Yes, go to Is the hydraulic fluid level near the center of the Table 8-24 Pump Electrical sight gauge? Troubleshooting • No, fill oil to the center of the sight gauge. ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-28...

  • Page 95: Table 8-24 Pump Electrical Troubleshooting

    (just above where you • No, check for a broken wire or poor wire checked in Step 4) and a nearby ground crimp on the red trigger going toward source? the hose. ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-29...

  • Page 96: Table 8-25 Pump Electrical Troubleshooting (Continued)

    "B" socket.) • Still no or continuity to both red trigger wire, then call Crafco, Inc. and request an RA# so you can send your hose back for repair. ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-30...

  • Page 97: Table 8-26 Pump Electrical Troubleshooting (Continued)

    Is the amber light "ON" when the wand trigger is pulled? (Looking down at the top of the hydraulic valve, Pump forward is the din plug lower right-hand corner, Refer to Fig. 8-5 Din Plug Layout.) ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-31...

  • Page 98: Table 8-27 Pump Electrical Troubleshooting (Continued)

    • Yes, replace the toggle switch. Is there 12 Vdc between the "Pump" toggle switch center post red wire and the blue (4) wires • No, go to Step 10d. ground din plug? ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-32...

  • Page 99: Table 8-28 Pump Electrical Troubleshooting (Continued)

    • No, recheck the amber light, if the light comes "ON" and you do not have 12 Vdc then replace the din plug. ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-33...

  • Page 100: Pump Hydraulic Troubleshooting

    Next turn “OFF” the Isuzu engine, remove the cap, pressure gauge and reattach the hose. Is the hydraulic flow correct from the  Yes, call Crafco, Inc. and speak to a service hydraulic pump? technician. You should have been able to (Refer to Fig.

  • Page 101: Fig. 8-9 Pump Circuit Schematic

    Super Shot 60 Propane Melter Part Manual Chapter 8 Troubleshooting Fig. 8-9 Pump Circuit Schematic ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 8-35...

  • Page 103: About The Illustrated Parts List

    9.1 Ordering Crafco Parts Crafco distributors and Crafco Pavement Preservation Supply Centers are strategically located throughout the United States. Parts can be ordered from your local Crafco distributor or directly from Crafco, Inc. if a distributor is not available in your area.

  • Page 104: Super Shot 60 Propane Trailer Melter Assembly 43300

    Chapter 9 Illustrated Parts List 9.2 Super Shot 60 Propane Trailer Melter Assembly 43300 11 12 14 15 33 34 36 37 38 Fig. 9-1 Super Shot 60 Propane Trailer Melter: PN 43300 ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-2...

  • Page 105: Table 9-1 Super Shot 60 Propane Trailer Melter: Pn 43300

    Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List Table 9-1 Super Shot 60 Propane Trailer Melter: PN 43300 FIG. ITEM PART NO. DESCRIPTION QTY. Fig. 9-1 44797 LED LICENSE PLATE LAMP 45989 LOCKING ARM, WAND SUPPORT 26104 ¼...

  • Page 106: Table 9-2 Super Shot 60 Propane Trailer Melter: Pn 43300 (Continued)

    Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List Table 9-2 Super Shot 60 Propane Trailer Melter: PN 43300 (continued) FIG. ITEM PART NO. DESCRIPTION QTY. Fig. 9-1 45420 HYDRAULIC VALVE ASSEMBLY 32513 TOGGLE SWITCH PUMP REVERSE...

  • Page 107: Table 9-3 Super Shot 60 Propane Trailer Melter: Pn 43300 (Continued)

    Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List Table 9-3 Super Shot 60 Propane Trailer Melter: PN 43300 (continued) FIG. ITEM PART NO. DESCRIPTION QTY. Fig. 9-1 31512 30 AMP CIRCUIT BREAKER (NOT SHOWN) 24190 OVERNIGHT HEATER ROD OPT.

  • Page 108: Super Shot 60 Propane Skid Melter Assembly 50750

    Chapter 9 Illustrated Parts List 9.3 Super Shot 60 Propane Skid Melter Assembly 50750 11 12 23 22 31 32 Fig. 9-2 Super Shot 60 Propane Skid Melter: PN 50750 ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-6...

  • Page 109: Table 9-4 Super Shot 60 Propane Skid Melter: Pn 50750

    Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List Table 9-4 Super Shot 60 Propane Skid Melter: PN 50750 FIG. ITEM PART NO. DESCRIPTION QTY. Fig. 9-2 47545N BRACKET, WAND MOUNTING SS60P 45989 LOCKING ARM, WAND SUPPORT 26104 ¼...

  • Page 110: Table 9-5 Super Shot 60 Propane Skid Melter: Pn 50750 (Continued)

    Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List Table 9-5 Super Shot 60 Propane Skid Melter: PN 50750 (continued) FIG. ITEM PART NO. DESCRIPTION QTY. Fig. 9-2 39608 LID SWITCH 43374 DIP STICK, HEAT TRANSFER OIL...
  • Page 111 Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List This page left blank intentionally ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-9...

  • Page 112: Tank Assembly, Ss60 Propane

    Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List 9.4 Tank Assembly, SS60 Propane 2 3 4 Fig. 9-3 Tank Assembly: SS60 Propane ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-10...

  • Page 113: Table 9-6 Tank Assembly: Ss60 Propane

    1” X 5” PIPE NIPPLE 28055 1” PIPE ELBOW 28210 1” X ¾” REDUCER BUSHING 28351 2” PIPE CAP 28273 2” X 5” PIPE NIPPLE 28060 43325 AGITATOR PADDLE ASSEMBLY ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-11...

  • Page 114: Control Box Assembly: Pn 44075

    H.T . BRN WHT-R ED R ED-LID WHT- GRN WHT- GRN BL U-P MP WH T-BL K WH T-B LK HOSE MATERIAL 12 11 Fig. 9-4 Control Box Assembly: PN 44075 ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-12...

  • Page 115: Table 9-7 Control Box Assembly: Pn 44075

    CORD GRIP CONNECTOR, SMALL 51651 PILOT LIGHT 12VDC 50719 TOGGLE SWITCH 51665 CIRCUIT BREAKER, 15 AMP 50593 KNOB (NOT SHOWN) RIBBON CABLE, 36” (NOT SHOWN) 51684 RIBBON CABLE, 5” (NOT SHOWN) 51698 ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-13...

  • Page 116: Gas Manifold Assembly; Pn 45592

    Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List 9.6 Gas Manifold Assembly; PN 45592 Fig. 9-5 Gas Manifold Assembly; PN 45592 ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-14...

  • Page 117: Table 9-8 Gas Manifold Assembly; Pn 45592

    3/8” PIPE WELD ON MOUNT CLAMP 45589 3/8” X 3.0” NIPPLE 28025 1/2” X 3/8” BUSHING 28345 45594 GAS MANIFOLD POL FEMALE X 1/4” MP 45598 1/4” PIPE COUPLING 28176 ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-15...

  • Page 118: Engine Assembly: Pn 44310

    Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List 9.7 Engine Assembly: PN 44310 Fig. 9-6 Engine Assembly: 44310 ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-16...

  • Page 119: Table 9-9 Engine Assembly: Pn 44310

    BELT GUARD OUTER COVER ASSEMBLY 5/16” -18 WING NUT 28619 43557 DRIVE BELT 55340 DRIVE PULLEY W/ BUSHING 55341 FRONT DRIVE SHAFT 44323 20 HP ENGINE 24250 HOUR/TACH METER (NOT SHOWN) ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-17...

  • Page 120: Hydraulic Control Valve Assembly: Pn 45420

    Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List 9.8 Hydraulic Control Valve Assembly: PN 45420 Fig. 9-7 Hydraulic Control Valve Assembly: PN 45420 ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-18...

  • Page 121: Table 9-10 Hydraulic Control Valve Assembly: Pn 45420

    FITTING, #8 ORB X #8 MALE JIC STR 45413 DUST CAP 45414 FITTING, TEST PORT 45416 FLOW CONTROL, PRIORITY 40308 FITTING, #6 ORB X #6 MALE JIC STR 29919 FITTING, #6 ORB X #8 MALE JIC STR ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-19...

  • Page 122: Pump/Mixer Motor Assembly: Pn 44832

    Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List 9.9 Pump/Mixer Motor Assembly: PN 44832 Fig. 9-8 Pump/Mixer Motor Assembly: PN 44832 ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-20...

  • Page 123: Table 9-11 Pump/Mixer Motor Assembly: Pn 44832

    44809 HYDRAULIC MOTOR, PUMP 1/2” TUBE X 5/8” O-RING ADAPTOR 29913 43345 MOUNTING BRACKET MOTORS 26002 SPROCKET CHAIN COUPLING 26016 CHAIN COUPLING 26030 CONNECTING LINK CHAIN 43323 SPROCKET MIXER DRIVE ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-21...

  • Page 124: Propane Burner Assembly: Pn 43123

    Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List 9.10 Propane Burner Assembly: PN 43123 Fig. 9-9 Propane Burner Assembly: PN 43123 ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-22...

  • Page 125: Table 9-12 Propane Burner Assembly: Pn 43123

    Table 9-12 Propane Burner Assembly: PN 43123 FIG. ITEM PART NO. DESCRIPTION QTY. Fig. 9-9 43118 MOUNTING PLATE ASSEMBLY AIR SHUTTER 43109 MOUNTING BRACKET 29858 90° ELBOW 41210 BURNER 43153 IGNITOR ORFICE #26 (NOT SHOWN) ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-23...

  • Page 126: Hydraulic Diagram: Pn 26535

    Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List 9.11 Hydraulic Diagram: PN 26535 Fig. 9-10 Hydraulic Diagram: PN 26535 ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-24...

  • Page 127: Table 9-13 Hydraulic Diagram: Pn 26535

    FITTING, #8 ORB X #8 JIC RUN TEE FLOW CONTROL VALVE “1” TO HYDRAULIC VALVE “PA”PORT 29897 FITTING, #8 ORB X #8 JIC 8M3K 8G-6FJX 8G-8FJX 24 HYDRAULIC HOSE FITTING, #6 ORB X #6 JIC 40308 ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-25...

  • Page 128: Table 9-14 Hydraulic Diagram: Pn 26535 (Continued)

    FITTING, #20 ORB X #12 JIC HYDRAULIC PUMP PRESSURE PORT TO HYDRAULIC VALVE “P” PORT 29862 FITTING, #10 ORB X #10 JIC 8M3K 8G-10FJX 8G-8FJX90L 76 HYDRAULIC HOSE 29897 FITTING, #8 ORB X #8 JIC ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-26...
  • Page 129 Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List This page left blank intentionally ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-27...

  • Page 130: Propane Schematic

    Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List 9.12 Propane Schematic LPG TANK GAS MANIFOLD ASSEMBLY BURNER ASSEMBLY POWER PACK ASSEMBLY Fig. 9-11 Propane Schematic ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-28...

  • Page 131: Table 9-15 Propane Schematic

    Table 9-15 Propane Schematic FIG. ITEM PART NO. DESCRIPTION QTY. Fig. 9-12 25074 TANK SPUD ASSEMBLY LP6-60 PROPANE HOSE ASSEMBLY LP6-S-17 FIRE JACKETED PROPANE HOSE ASSEMBLY LP6-18 PROPANE HOSE ASSEMBLY ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-29...

  • Page 132: Electrical Schematic

    HEATER BLUE HEATER BLUE TRIGGER RED TRIGGER GRN SENSOR BLACK SENSOR WHITE MATERIAL PUMP MATERIAL PUMP HEATER GREEN FORWARD REVERSE HEATER WHITE HEATER BLACK JUNCTION BOX WIRING Fig. 9-12 Electrical Schematic ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-30...

  • Page 133: Table 9-16 Electrical Schematic

    Table 9-16 Electrical Schematic FIG. ITEM PART NO. DESCRIPTION QTY. Fig. 9-12 43900 CABLE ASSEMBLY, HOSE 43928 CABLE ASSEMBLY. TRIGGER/SENSOR 43921 CABLE ASSEMBLY, HYDRAULIC VALVE 43926 CABLE ASSEMBLY, SENSOR 43929 CABLE ASSEMBLY, POWER ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-31...

  • Page 134: Wand Assembly Pn 52200

    Super Shot 60 Propane Melter Part Manual Chapter 9 Illustrated Parts List 9.14 Wand Assembly PN 52200 Fig. 9-13 Wand Assembly PN 52200 ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-32...

  • Page 135: Table 9-17 Wand Assembly Pn 52200

    HANDLE, WAND – LEFT (NOT SHOWN) GEN 2 52201LN 52208 SWITCH, WAND 52202N ACTUATOR GEN 2 52207 SPRING, ACTUATOR 52209 PIN, ACTUATOR 52203N LOCK, TRIGGER GEN 2 51656 TERMINAL STRIP ©2018 by Crafco, Inc. All Rights Reserved………………...…………………………..……………...Illustrated Parts List 9-33...

  • Page 137: Tools And Accessories

    27130 – 4” Swivel Applicator Crafco Round Sealing Tip 27170 – 3/8” Sealing Tip 27171 – 1/2” Sealing Tip Crafco Sealing Foot/Flush 27154 – 1/4” Flush 27155 – 3/8” Flush ©2018 by Crafco, Inc. All Rights Reserved………………...………………………………..………………..Tools and Accessories 10-1...
  • Page 138 27195 – Replacement Blade Super Shot Drip Stopper Use with 50270 Duckbill 27114 – Tip Adapter 27115 – Shroud, Tip Adapter Crafco Hand Held Pour Pot - 40201 Crafco Duckbill - 50270 ©2018 by Crafco, Inc. All Rights Reserved………………...………………………………..………………..Tools and Accessories 10-2...
  • Page 140 ©2018 Crafco, Inc.

Table of Contents