Viking Electronics E-60-BK-IP Quick Start Manual

VIKING
QUICK START GUIDE
See Product Manual for complete installation and programming instructions.
1.0 Out-of-Box
1.1 Verify that you have received all of the parts listed
1.2 Download the product manual
Scan the QR code to
open and download
the product manual
1.3 Download and install the programming software
1. Go to www.vikingelectronics.com and enter E-60-BK-IP in the search box
2. Click E-60-BK-IP in the search results
3. Scroll down the page to Downloads, click IP Programming Software
4. Install the programming software by saving or opening the file and then clicking on
setup Viking IP Programming.exe
5. Follow the prompts on your screen to complete software installation
2.0 Power Source
Select PoE Switch or PoE Injector that meets the following requirements:
1. IEEE 802.3af / 802.3at / 802.3bu compliant
2. Capable of providing at least 4 Watts (class 1)
Note: CAT5e (or higher) cable recommended
Electronics, Inc.
E-60-BK-IP or E-60-BK-IP-
X 1
EWP Entry Phone
X 1
Face Plate Black
X 1
Faceplate Gasket
X 2
Plate Adapter
- OR -
E-60-BK-IP or
E-60-BK-IP-EWP
VoIP Entry Phone
September 25, 2018
X 1
X 4
X 4
X 1
X 5
1. Go to www.vikingelectronics.com and
enter E-60-BK-IP in the search box
2. Click E-60-BK-IP in the search results
3. Click Product Manual to open and
download the PDF
Light Pipe
6-32 x 1.25" Flat Head Hex
Drive Screws Black painted
6-32 x 3/4" Flat Head Hex
Drive Screws
Hexkey 5/64
Gel-Filled Butt Connectors