Summary of Contents for Galvin Flowmatic Safe-Cell
Page 1
Input Voltage 24V AC Controller Program type Standard/Special Connections 3.5mm Jack 5 Input & DC plug 5 Output Finish (user) Stainless Steel Nominal Flow Rate (LPM) NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice.
GENERAL INSTALLATION REQUIREMENTS Do not cut the wires or extended the existing leads without using a correct lead extension from Galvin Specialised, as this will void warranty. Suitable access to the service of all components must be provided.
Version 2, 30 August 2017, Page 3 of 8 MOUNTING DETAILS Face plate cut out position Cut out details for face plate Locate push button faceplate at a suitable The stainless steel face plate assembly should distance from the outlet (we recommend 300mm be mounted flush to the wall over a 98mm x from the centre of the outlet and at a suitable 60mm cut-out, ensure wall depth between...
If extension leads are required, please Note: Refer to solenoid operating instructions contact Galvin Specialised. manual for installation and service maintenance. Do not force the faceplate to fit onto wall or attempt to dissamble components, as this could result in damage to sensor push button.
Page 5
Version 2, 30 August 2017, Page 5 of 8 Typical Installation Connect water 4. Mount control module Connect the water supply to the strainers Fit the four mounting feet supplied with the and turn on water supply. Check for leaks. control module to the back of the controller module box.
Page 6
If required more extension leads, The connection of this product to mains power please contact Galvin Specialised. supply should be undertaken by a competent person and should confirm to local Wiring Do not cut the leads. If the leads are Regulation –...
Version 2, 30 August 2017, Page 7 of 8 TROUBLE SHOOTING PROBLEM CAUSE RECTIFICATION No Power Check power is reaching transformer Outer ring on push button not illuminated. Ensure all leads are firmly pushed Leads not connected correctly into connectors No power Check power is reaching transformer Check electrical connections, replace...
WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied.