Config - Advanced Tab - Asus SpaceLink WL-230 User Manual

B&w pci card
Hide thumbs Also See for SpaceLink WL-230:
Table of Contents

Advertisement

Chapter 3 - Wireless LAN Reference
3.2.8

Config - Advanced Tab

Advanced tab provides some additional settings for the ASUS SpaceLink
B&W PCI Card.
Country
Allows users to select the country where ASUS wireless network adapters will
be operated. The country code specifies the corresponding regulatory domain
and constructs a channel list for channel scanning.
Channel
Using the Channel field to select the radio channel for card. In an "infrastructure"
network, the card will automatically select the correct frequency channel
required to communicate with an Access Point, this parameter will be fixed in
"Auto" and cannot be changed. In an "Ad Hoc" network, you can decide channel
number for the card. The radio channels you may use depend on the regulations
in your country.
Start Ad Hoc Network
Choose which wireless mode will start an Ad Hoc network if no matching
SSID is found after scanning all available modes. The default value is 5 GHz
54 Mbps (802.11a).
ASUS SpaceLink B&W PCI Card
37

Advertisement

Table of Contents
loading

Table of Contents