PEUGEOT 308 Handbook page 105

Hide thumbs Also See for PEUGEOT 308:
Table of Contents

Advertisement

A ring B, in the boot (indicated by a label),
referred to as TOP TETHER, for securing the
upper strap.
The TOP TETHER secures the upper strap of
child seats that have them. In case of frontal
impact, this device limits the tilting of the child
seat forward.
The TOP TETHER is located on the boot floor
behind the seat backrest.
Do not use the luggage net rings
(hatchback) or stowing rings (SW), located
at the edges of the boot floor.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats are fitted with two
latches which are easily secured on the two
rings A.
Some also have an upper strap which is
attached to ring B.
To secure the child seat to the TOP TETHER:
-
remove and stow the head restraint before
installing the child seat on the vehicle seat
(refit it when the child seat is removed),
-
pass the child seat upper strap over the top
of the seat backrest, centring it between the
apertures for the head restraint rods,
-
attach the hook of the upper strap to ring B,
-
tighten the upper strap.
The incorrect installation of a child seat in
a vehicle compromises the protection of
the child in the event of an accident.
Strictly observe the fitting instructions
provided with the child seat.
For information regarding the ISOFIX
child seats which can be installed in your
vehicle, refer to the table showing the
locations for installing ISOFIX child seats.
If your vehicle has a standard spare wheel of
the same size as the four wheels, follow the
procedure below:
F pass the strap and spring hook over the
boot floor (in the slot),
F raise the boot floor,
F lift out the upper storage box, located
alongside the wheel,
F attach the spring hook to the TOP TETHER
ring,
F refit the storage box and boot floor.
Safety
5
103

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents