Advertisement
To adjust the tilt of the TV screen on the
10
brackets loosen the side screws then
tighten when correct angle is achieved.
1
11
x1
C
C
Once happy with the screen angle mount the
TV onto the bracket and secure in place with
parts D.
2
ST90E3 REV9
Product Name: STRATA E3
Product Ref: ST90E3
Art number: 407250
= 45mins
= 35mins
(UK)Free Phone 0800 634 2699
(US)Toll Free (844) 499-1159
salesdesk@techlink.uk.com
www.techlink.uk.com
Web
www.recharge.uk.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Techlink STRATA E3
- Page 1 Product Name: STRATA E3 To adjust the tilt of the TV screen on the Once happy with the screen angle mount the brackets loosen the side screws then TV onto the bracket and secure in place with Product Ref: ST90E3 tighten when correct angle is achieved.
- Page 2 40KG 10KG 10KG 10KG STRATA ST90E3 [12] [13] x2 [10] [11x2] [A] x 2 [B] x 2 [C] x 1 [E] x 1 [D] x 1 [F] x 1 [G] x 1 [H] x 2 SCREEN [S1] x 4 [S2] x 4 [S3] x 4 [S4] x 4 [S5] x 4...
- Page 4 Screen Fitting including Sound Bar Mounting Bracket [1] x 2 15KG [A] x 2 [B] x 2 [C] x 4 [D] x 4 [E] x 4 [F] x 4 (M4 X 14) (M5 X 14) (M6 X 14) (M6 X 30) (M8 X 20) (M8 X 30) [L] x 2...
- Page 5 Slide the bracket onto the pole and secure at If the mounting holes on your TV are a height suitable for your screen size. low secure the bracket lower If the mounting holes on your TV are high secure the bracket higher If tting soundbar bracket go to step 9b SCREEN FITTING KIT REQUIRED...
- Page 6 Full Movement Restricted Movement No Movement For optimum screen height for screens below 40” remove the top screw from part 5 as shown above. For screens above 40” do not remove this screw.
Need help?
Do you have a question about the STRATA E3 and is the answer not in the manual?
Questions and answers