Freedom Beaumont Privacy Blind Installation Instructions

Advertisement

Quick Links

readymade
beaumont privacy blinds
Thank you for purchasing the Beaumont Privacy Blinds. Please check to ensure that all hardware and parts have been
supplied. This page lists all contents included in the packaging.
Follow instructions closely as deviation from them may present a possible safety risk and may void your warranty.
If you experience any problems with your new purchase, please contact Freedom Curtain and Blind Customer Care on
1800 676 612.

Care Information

Gently dust with a clean cloth or using a venetian blind cleaner
Do not wash
Do not clean with harsh or abrasive materials

Hardware

(B)
(A)
Screws
Screws
Masonry Plugs
x4
x6
(large)
(small)

Tools (not supplied)

Phillips head
Flat head
screwdriver
screwdriver

Installing the Beaumont Privacy Blind

WARNING: Check what substrate you are fixing into and that there is su cient support for the weight of
the blinds and brackets. We suggest fixing into studs, brick or timber and that the appropriate
attachments for the drill are used.
Note: When installing blinds inside the window frame, brackets can be mounted three ways - top, side or
face. For outside mount to the window architrave, face mounting is the method used.
Please refer to the diagrams which demonstrate the various mounting options.
Side Mount
To determine which mounting option is best suited to your window, consider the following;
Does the blind fit inside the window frame? If not, an outside face mount will be required.
Does the window have enough depth to mount the bracket inside the frame? If not, an outside face
mount will be required.
www.freedom.com.au
(C)
(D)
Extenders
x min 2
x4
(I)
Valance
Pencil
Point nose pliers
Top Mount
(E)
Mounting Brackets
Cord Cleat
x2
(J)
Valance Clips
Valance Returns
x min 2
Scissors
Face Mount
(F)
(G)
Hold down clips
x2
x2
(K)
x2
Ladder
Drill
(H)
Valance Return
Clips
x2
(L)
Centre Support
(included with blinds
105cm wide & above)
x min 1
Tape Measure
Page 1 of 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Beaumont Privacy Blind and is the answer not in the manual?

Questions and answers

Summary of Contents for Freedom Beaumont Privacy Blind

  • Page 1 This page lists all contents included in the packaging. Follow instructions closely as deviation from them may present a possible safety risk and may void your warranty. If you experience any problems with your new purchase, please contact Freedom Curtain and Blind Customer Care on 1800 676 612.
  • Page 2 Always tilt blind horizontally before raising and lowering to extend life of the blind. To Lower Blind: Pull cords to the centre of the blind and down slightly to release the lock. Gently release the cords until www.freedom.com.au Page 2 of 3...
  • Page 3 CAN BE TILTED TO ADJUST LIGHT AS DESIRED. WHEN RAISING THIS BLIND ANOTHER PERSON SHOULD ASSIST BY LIFTING THE BOTTOMBAR/RAIL OF THE BLIND USING BOTH HANDS WHILST LIFT CORD IS BEING PULLED DOWNWARD. ENSURE THE CORD IS LOCKED INTO POSITION BEFORE LETTING GO OF THE BOTTOM OF THE BLIND. www.freedom.com.au Page 3 of 3...

Table of Contents