Electrical Requirements - Westinghouse WHT2401 User Manual

SAFETY INFORMATION
10. Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire, or
damage the heater.
11. To prevent a possible fire, do not block air intakes or exhaust
in any manner. Do not use on soft surfaces, like a bed, where
openings may become blocked.
12. A heater has hot and arcing or sparking parts inside. Do not use
it in the areas where gasoline, paint, or flammable liquids are
used or stored.
13. Use this heater only as described in this manual. Any other use
not recommended by the manufacturer may cause fire, electric
shock, or injury to persons.
14. CAUTION: Always plug heaters directly into a wall outlet/
receptacle. Never use with an extension cord or relocatable
power tap (outlet/power strip).
15. This heater draws 12.5 amps during operation. To prevent
overloading a circuit, do not plug the heater into a circuit that
already has other appliances working.
16. The output of this heater may vary and its temperature may
become intense enough to burn exposed skin. Use of this heater is
not recommended for persons with reduced sensitivity to heat or an
inability to react to avoid burns.
17. Don't leave the heater on unattended.
SAVE THESE INSTRUCTIONS
SAFETY INFORMATION

ELECTRICAL REQUIREMENTS

This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a polarized outlet
only one way. If the plug does not fit into the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to modify the plug in
any way.
NOTE: Neither Westinghouse nor the dealer can accept any liability for damage to the
product or personal injury resulting from failure to observe the electrical connection
procedures.
WARNING: To reduce the risk of electric shock, do not use with an extension cord.
Page 4
HOUSEHOLD USE ONLY