Package Contents Soundbar AC Adapter AUX-IN Cable Remote Control LINE-IN Cable User's Guide Bracket Features Provides powerful sound to enhance your listening experience Easy to connect to your devices Remote for convenient controlling from a distance Note: The power source must supply 16V DC .
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles,and the point where they exit the soundbar. Unplug this soundbar during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the soundbar has been damaged in any way, such as if the power-supply cord or plug is damaged, liquid has been spilled or...
Page 4
Connections DC IN Connect the AC adapter FM Radio to the DC IN jack,then Cable Power On/Off plug it into a outlet. Bass output AUX IN Use the supplied RCA cable to connet to the audio output jacks on your device(TV,DVD, game system,ect.).
Page 5
Play/Pause Short Press for PRV, Long Press for V- Signal Receiving of Remote Short Press for Next Long Press for V+ Display Bluetooth Pairing Source Switching Standby Control (Bluetooth,Usb,Optical Fiber,FM Radio,AUX In) LINE IN (For TV Sets,DVD, Computer,Mobile Phone and so on) USB port Mic SD card port...
Page 6
Mounting the Soundbar (Optional) For mounting the soundbar, you may need a twist drill, a marker pen or pencil, a bubble level, two screws, and two drywall anchors (optional). 1. Locate a place for mounting the soundbar. Make sure you have enough room for both ends of the soundbar to present unobstructed sound transmission.
Page 7
Instructions of Remote POWER:Standby MUTE :Mute Control KEY AUX:AUX In control BT: Bluetooth Control Key LINE :LINE IN OPTIC:Audio Inputs via Optical Fiber FM:FM Radio Control MP3:MP3 Audio Inputs CH-:FM Channel Key Play/Pause for Mp3 playing of downward searching Auto memory for FM Radio CH+:FM Channel Key VOICE:Sound Mode of upward searching...
Troubleshooting Problem Solution Make sure the AC adapter is plugged into a working outlet and firmly connected to the No sound soundbar. Check the connection of your device to the soundbar. Check your source device to see if it is Distorted sound causing the distortion.
Should a problem occur that is covered by this warranty, take the product and the sales receipt as proof of purchase date to the place of purchase. Gosinggo will, at its option, unless otherwise provided by law: (a) repair the product without charge for parts and labor;...
Page 10
INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF GOSINGGO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow limitations on how long an implied...
Page 11
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 12
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Need help?
Do you have a question about the GS-SB002 and is the answer not in the manual?
Questions and answers